Christmas Giving 2015

[GCJenks204]

Okay, I said before and I'll say again, I don't have any saw related stuff to give but it is time to step up with something.

Maybe we should let some of the guys with huge stock piles of parts that they are giving from get a shot at this before any claims it.

A clip on adjustable task light, new in box. I will include shipping from the 51st State (oh how I wish...)

 

[MontanaTed]

Okay, I said before and I'll say again, I don't have any saw related stuff to give but it is time to step up with something.

Maybe we should let some of the guys with huge stock piles of parts that they are giving from get a shot at this before any claims it.

A clip on adjustable task light, new in box. I will include shipping from the 51st State (oh how I wish...)

View attachment 465702

That's a nice task light, someone will be able to use that bugger.

Nice to see a present listed [emoji6]


Sent from my iPhone using Tapatalk

 

[Mastermind]

This is going to be a long winded thread and I expect some *ahem* banter but lets not get carried away... maybe too late.

So.....

I get it.

I'll go back to my corner.

 

[TRTermite]

So.....

I get it.

I'll go back to my corner.

YOU get a 5 star "ATTABOY"

 

[Fishinfreak99]

Up for grabs.

Would like to see these go to someone that would use them and not for resale. There are 9 new gas caps but only one oil cap. The handle and side cover and handle mounts I don't have any idea what they fit. Would love to know if someone could tell me. The bar cover is well used but still pretty cool for a shelf queen I guess. Anyways would like to spread the love on these so only ask for what you could use so somebody else might can get some. Also will cover shipping but will only ship once all items are spoken for so I only have to go once to that mad house. Thanks.
There are five of the handle mounts.

 

[Jimmy in NC]

Ok.. like others, I'm low on saw stuff but I do have a little time and some rookie talents.

To this thread I offer square sharpening of up to 252 DL of 3/8 chain. The angles will be what I use as a work angle in the south east. That should get you 3 loops of 20",3 of 24/25" or 2 loops at 32", etc. .050,.058,.063 makes no difference. I'll clean the gullets and set the rakers at 0.025"

Now I've offered chain sharpening in the past and I have to offer a few guidelines:
- No frozen links or heavily rusted chains.
-If you send a chain that has lots of varying lengths of cutters, I'm going to even them up and then square them and you'll loose some cutter length. Same goes for "rocked" chains.. I can fix it but like any other sharpening, you are loosing the length.
-I can NOT square semi-chisel chain, chisel cutters only; LGX , RS, etc.
-Ship them to me in a small flat rate box USPS, I'll sharpen in 14 days (I have a very busy job and a family..shop time is hard to get) and I'll pay postage back.


In the spirit of the thread, I'd like this to go to someone that has NOT received a gift yet.. contact me via PM and I'll post back when it's claimed.

Some recent chains:
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg
http://images.tapatalk-cdn.com/15/11/23/dad1dd0fd2fc6193887dfffe508df320.jpg
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg

 

[Jimmy in NC]

Up for grabs. View attachment 465705View attachment 465706 View attachment 465707

Would like to see these go to someone that would use them and not for resale. There are 9 new gas caps but only one oil cap. The handle and side cover and handle mounts I don't have any idea what they fit. Would love to know if someone could tell me. The bar cover is well used but still pretty cool for a shelf queen I guess. Anyways would like to spread the love on these so only ask for what you could use so somebody else might can get some. Also will cover shipping but will only ship once all items are spoken for so I only have to go once to that mad house. Thanks.
There are five of the handle mounts.

Pmd.

 

[Jimmy in NC]

Ok.. like others, I'm low on saw stuff but I do have a little time and some rookie talents.

To this thread I offer square sharpening of up to 252 DL of 3/8 chain. The angles will be what I use as a work angle in the south east. That should get you 3 loops of 20",3 of 24/25" or 2 loops at 32", etc. .050,.058,.063 makes no difference. I'll clean the gullets and set the rakers at 0.025"

Now I've offered chain sharpening in the past and I have to offer a few guidelines:
- No frozen links or heavily rusted chains.
-If you send a chain that has lots of varying lengths of cutters, I'm going to even them up and then square them and you'll loose some cutter length. Same goes for "rocked" chains.. I can fix it but like any other sharpening, you are loosing the length.
-I can NOT square semi-chisel chain, chisel cutters only; LGX , RS, etc.
-Ship them to me in a small flat rate box USPS, I'll sharpen in 14 days (I have a very busy job and a family..shop time is hard to get) and I'll pay postage back.


In the spirit of the thread, I'd like this to go to someone that has NOT received a gift yet.. contact me via PM and I'll post back when it's claimed.

Some recent chains:
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg
http://images.tapatalk-cdn.com/15/11/23/dad1dd0fd2fc6193887dfffe508df320.jpg
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg

Claimed by SVK.


If time allows I may do another one of these closer to the 25th. I'm not taking 'dibs' or sob stories yet...stay tuned.

 

[Philbert]

A clip on adjustable task light, new in box.

That would be a nice light for sharpening: filing, grinding, however you do it.

Up for grabs.

Best pun of the thread so far: 'Up for Grabs', and he lists a top handle . . .

Philbert

 

[MGoBlue]

If no one else claims the task light, put me in line. When I get home, I'll look around and see what I can give.

 

[David Young]

Up for grabs. View attachment 465705View attachment 465706 View attachment 465707

Would like to see these go to someone that would use them and not for resale. There are 9 new gas caps but only one oil cap. The handle and side cover and handle mounts I don't have any idea what they fit. Would love to know if someone could tell me. The bar cover is well used but still pretty cool for a shelf queen I guess. Anyways would like to spread the love on these so only ask for what you could use so somebody else might can get some. Also will cover shipping but will only ship once all items are spoken for so I only have to go once to that mad house. Thanks.
There are five of the handle mounts.

.

@exSW

 

[cgraham1]

Glad to see this got back on track. So nobody wants a CS-315 Echo chainsaw? Damn.

 

[Philbert]

So nobody wants a CS-315 Echo chainsaw? Damn.

Looks like a great saw, but it's only been listed for 12 hours - maybe some folks are at work.

Philbert

 

[David Young]

I'll take the dolmar clint. Are you covering the shipping. I'll pm you my address

 

[decableguy2000]

Have a few more items kicking around the tool shed, I'm request you pay fro the ride to your location.
1. aftermarket coil for 394/395
2. Lot of Husqvarna 61-272 parts flywheel, carb, intake, carb block, studs, oil pump

3. Custom bucking spikes for 262 this is regift from a year a two ago they work great but I cant close the lid on my tool box that saw rides around in the truck. - Already spoken for

 

[David Young]

@Manugoss

I know he is looking for a 266/272 carb

 

[skippysphins]

Super nice spikes for a 262 !!

 

[Modifiedmark]

Ok.. like others, I'm low on saw stuff but I do have a little time and some rookie talents.

To this thread I offer square sharpening of up to 252 DL of 3/8 chain. The angles will be what I use as a work angle in the south east. That should get you 3 loops of 20",3 of 24/25" or 2 loops at 32", etc. .050,.058,.063 makes no difference. I'll clean the gullets and set the rakers at 0.025"

Now I've offered chain sharpening in the past and I have to offer a few guidelines:
- No frozen links or heavily rusted chains.
-If you send a chain that has lots of varying lengths of cutters, I'm going to even them up and then square them and you'll loose some cutter length. Same goes for "rocked" chains.. I can fix it but like any other sharpening, you are loosing the length.
-I can NOT square semi-chisel chain, chisel cutters only; LGX , RS, etc.
-Ship them to me in a small flat rate box USPS, I'll sharpen in 14 days (I have a very busy job and a family..shop time is hard to get) and I'll pay postage back.


In the spirit of the thread, I'd like this to go to someone that has NOT received a gift yet.. contact me via PM and I'll post back when it's claimed.

Some recent chains:
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg
http://images.tapatalk-cdn.com/15/11/23/dad1dd0fd2fc6193887dfffe508df320.jpg
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg

Up for grabs. View attachment 465705View attachment 465706 View attachment 465707

Would like to see these go to someone that would use them and not for resale. There are 9 new gas caps but only one oil cap. The handle and side cover and handle mounts I don't have any idea what they fit. Would love to know if someone could tell me. The bar cover is well used but still pretty cool for a shelf queen I guess. Anyways would like to spread the love on these so only ask for what you could use so somebody else might can get some. Also will cover shipping but will only ship once all items are spoken for so I only have to go once to that mad house. Thanks.
There are five of the handle mounts.

I have a buddies Super XL-12 here right now that could use one of those gas caps if any are still available. I don't expect it shipped for free either,,

 

[hanniedog]

decableguy2000 I will take the 262 fellings dogs if still up for grabs. Thanks

 

[decableguy2000]

decableguy2000 I will take the 262 fellings dogs if still up for grabs. Thanks

Consider them yours