ArboristSite.com Sponsors
 
 


  1. Please see this post Click Here Please ask questions if you have them!! I hope this is going to be great for us all.
    Dismiss Notice

Eager Beaver gas ratio mix?

Discussion in 'Chainsaw' started by rooster68, Mar 13, 2011.

  1. rooster68

    rooster68 ArboristSite Member

    Joined:
    Mar 10, 2010
    Messages:
    57
    Likes Received:
    7
    Location:
    central MN.
    MY nephew was kind enough to bring me a saw to get running that belongs to his friend,found recoil rope was bound inside (fixed)got it running so-so, hafta replace gas line,pick up screen was laying in tank,need to know what the gas ratio is for it,can i just use 50-1 and adjust carb according??thanx...
     
  2. promac850

    promac850 formerly promac610

    Joined:
    Nov 27, 2010
    Messages:
    7,652
    Likes Received:
    883
    Location:
    Michigan
    40:1 with a quality oil such as Stihl Ultra or Quaker State.
     
  3. rooster68

    rooster68 ArboristSite Member

    Joined:
    Mar 10, 2010
    Messages:
    57
    Likes Received:
    7
    Location:
    central MN.
    Thanx for reply,ive searched on here and did find 1 thread said 40 to1 using mac oil or 20 to1 using standard SAE oil??
     
  4. promac850

    promac850 formerly promac610

    Joined:
    Nov 27, 2010
    Messages:
    7,652
    Likes Received:
    883
    Location:
    Michigan
    That is correct, 40:1 with a good quality two-stroke (no outboard) oil, or 20:1 with an non-detergent SAE motor oil.

    I love the 610. :)
     

Share This Page