Welcome to ArboristSite.com! Log in or Sign up to interact with the ArboristSite community.

ArboristSite.com Sponsors
 
 


  1. Please see this post Click Here Please ask questions if you have them!! I hope this is going to be great for us all.
    Dismiss Notice

Want to Sell Homelite XL-700

Discussion in 'Chainsaws' started by Kensie1988, Jul 17, 2017 at 9:27 AM.

Tags:
  1. Kensie1988

    Kensie1988 Vintage Saw Maniac

    Joined:
    Oct 12, 2016
    Messages:
    1,793
    Likes Received:
    2,668
    Location:
    Louisiana
    So this Saw is in decent shape cosmetically but still shows the normal wear. It also has no spark an I never figured out why, but someone with more experience might have better luck than me. The fuel tank also leaks from the seam where I took the last photo attached. I also have an aftermarket piston I bought from Chainsawr because I felt like the compression may be a little weak. Im only asking $100 plus shipping for all of it. Paypal Friends and family or add 4%. Shoot me a PM if your interested.
    IMG_7544.JPG IMG_7545.JPG IMG_7546.JPG IMG_7547.JPG IMG_7549.JPG IMG_7550.JPG IMG_7551.JPG IMG_7552.JPG IMG_7548.JPG
     
    Mac&Homelite and rushinrio12 like this.
  2. rushinrio12

    rushinrio12 ArboristSite Operative

    Joined:
    Dec 2, 2015
    Messages:
    102
    Likes Received:
    43
    Location:
    Plainfield, CT
    Is this saw built on the same frame as the super xl, just with more displacement?
     
  3. Mac&Homelite

    Mac&Homelite Addicted to ArboristSite

    Joined:
    Dec 14, 2016
    Messages:
    1,039
    Likes Received:
    1,909
    Location:
    Minnesota
    Nice saw Kensie! Wish I was at the point of letting saws go for that low because I have too many to work on lol. #cadproblems
     
    rushinrio12 likes this.
  4. Mac&Homelite

    Mac&Homelite Addicted to ArboristSite

    Joined:
    Dec 14, 2016
    Messages:
    1,039
    Likes Received:
    1,909
    Location:
    Minnesota
    Nice saw Kensie! Wish I was at the point of letting saws go for that low because I have too many to work on lol. #cadproblems
     
    Kensie1988 likes this.
  5. Kensie1988

    Kensie1988 Vintage Saw Maniac

    Joined:
    Oct 12, 2016
    Messages:
    1,793
    Likes Received:
    2,668
    Location:
    Louisiana
    It was the early 920 series frame before the started using bolts for the two piece fuel tank.. The XL-700 was the 77cc and the XL-800 was the 82cc.
     
    Mac&Homelite likes this.

Share This Page