Want to Sell Husky 371 and 394 for sale

[Trophyelk6x6]

MINT, 371 very little use all OEM. I bought a 52 mm big bore kit also available for this saw. Also a nice 394 (has 395 sticker on cover fyi) both saws run great. 394 has a recent dual port muffler work completed. Will ship for 45.00 per saw. 371 is 425.00 and with big bore complete kit 480.00 FIRM + shipping non nego. 394 is 525.00 + shipping FIRM. Thanks Mike

 

[Harzack223]

Not trying to be a dink but you may deter potential buyers with your $45 shipping. In most cases a saw will ship in the $30-40 range across the country. It is also helpful to list your location so people will have an idea of what it may actually cost for shipping.

 

[Big_Wood]

not sure where he's from but if he's from Canada the 371 will be $65-$70 and the 394 a bit more to ship.

 

[Trophyelk6x6]

Sorry guys, just a rookie on this site . I have sold over 50 saws or more, never had to ship outside of my last 2100 and 2101 builds so I am going off of my local fed ex rates that cost me my profits. I live in Belfair Wa, and have sold many saws. My buddy Jim Rivers ( Jim Stihl ) on this site is my close friend. We have built, imported saws from Canada for years. I use craigslist but I am tired of dealing with liberals. If buyers want to handle shipping on their own then great. I would prefer to deal with buyers within a few hours away where I can meet in person and show the saws. I am willing to meet you within 2 hours in person. thanks

 

[Harzack223]

It's all good, I've shipped a few times at a loss. But more recently I was quoted a price on something only to find the shipping label listed less. Wasn't to happy about that. GLWS, If I didn't just pick up a 660 I'd be all over that 394.

 

[Trent Curtis]

I don't beat people up over shipping prices- just consider that as part of their asking price.

These are nice saws, fairly priced

 

[chipper1]

Not trying to be a dink but you may deter potential buyers with your $45 shipping. In most cases a saw will ship in the $30-40 range across the country. It is also helpful to list your location so people will have an idea of what it may actually cost for shipping.

Hey Josh.
You might crap yourself if you asked for a shipping quote to your place from his LOL.
I've spent 50 or more for every saw shipped to WA, or the ones I've received from out there, and your a good bit away from me.

It's all good, I've shipped a few times at a loss. But more recently I was quoted a price on something only to find the shipping label listed less. Wasn't to happy about that. GLWS, If I didn't just pick up a 660 I'd be all over that 394.

Hope that wasn't on mine, if I messed up I'll send it right to you .
Hope your liking the 660.

 

[Bill G]

Not trying to be a dink but you may deter potential buyers with your $45 shipping. In most cases a saw will ship in the $30-40 range across the country. It is also helpful to list your location so people will have an idea of what it may actually cost for shipping.

Take a gander at the shipping from WA to NH it might surprise you

 

[chipper1]

Take a gander at the shipping from WA to NH it might surprise you

You obviously missed my point .

 

[Bill G]

You obviously missed my point .

What point did I miss?

 

[chipper1]

What point did I miss?

 

[Bill G]

That point would be what?

 

[Bill G]

Not trying to be a dink but you may deter potential buyers with your $45 shipping. In most cases a saw will ship in the $30-40 range across the country. It is also helpful to list your location so people will have an idea of what it may actually cost for shipping.

Take a gander at the shipping from WA to NH it might surprise you

I just checked FedEx and a 30lb box going from Belfair WA to Loudon NH using my discounted rates is $47.30. The seller is spot on at $45

 

[aswan]

That's a nice 371. GLWS

 

[redoakman]

exchange rate sucks ass or i would be intrested in 394 .

 

[MnSam]

As far as shipping goes I'll gladly pay a little more than actual shipping cost if it guarantees a carefully packed saw using proper materials in a secure container.

 

[Marshy]

@Trophyelk6x6, whats the compression on the 394? Does it sill have the base gasket installed? Can I bother you for a picture of the piston with the muffler removed?
Check your inbox.

Thanks

 

[Trophyelk6x6]

394 sold today fyi.

 

[Bill G]

394 sold today fyi.

That is a good deal

 

[gary courtney]

shipping is on the money