Husqvarna 262xp clutch options

[decableguy2000]

My 262's clutch is worn, new drum and spring helped a with the slipping, I know a 2 shoe from a 55 will work. I was wondering if there are other models that may work from a 357, 460, 455? Anyone using something different with good results.

Jeremy

 

[Warped5]

The 257 or 261 may work, but would only be a two-shoe and may very well be mangled by the awesome torque of the 262.

.... or you could just order a new one from Bailey's for like $47.

 

[Sierradmax]

357/359 works

 

[dynodave]

.... or you could just order a new one from Bailey's for like $47.

3 shoe 262XP 503 57 71-01 $42.34 bought one back in January.....now $53.57 WOW

 

[decableguy2000]

357/359 works

Did you use the big washer under the clutch?

3 shoe 262XP 503 57 71-01 $42.34 bought one back in January.....now $53.57 WOW

357/359 clutches seem to be more plentiful and cheaper and have some aftermarket options.

Jeremy

 

[BWS-LLC]

Bryan Plust has some used ones I believe.

 

[Warped5]

3 shoe 262XP 503 57 71-01 $42.34 bought one back in January.....now $53.57 WOW

Holy crap! Made my purchase about 3 - 4 weeks ago ....

 

[Sierradmax]

Did you use the big washer under the clutch?

I don't remember. I'd have to pull the clutch off to see. I think the factory 262xp clutch needed the washer to prevent it from binding up with the clutch drum. I bought an ebay 262xp and this clutch came with it. I did some homework to find out it was a 357/359. Engagement rpm is a couple hundred off.

http://www.arboristsite.com/community/threads/clutch-id.251106/#post-4668668

 

[BigDee]

I don't remember. I'd have to pull the clutch off to see. I think the factory 262xp clutch needed the washer to prevent it from binding up with the clutch drum. I bought an ebay 262xp and this clutch came with it. I did some homework to find out it was a 357/359. Engagement rpm is a couple hundred off.

http://www.arboristsite.com/community/threads/clutch-id.251106/#post-4668668

How is that 359 clutch working out on the 262?

Where did you find the engagement rpm and which way is it off compared to the original?

 

[Sierradmax]

workshop manuals. I think 359 is 3800 rpm, 262xp is 3400.

 

[BigDee]

Thanks. Does it make any noticeable difference?

 

[Sierradmax]

I haven't noticed.