• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 3120

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 26, 2001
Messages
17,583
Reaction score
7,746
Location
Oregon
This 3120 is fully rebuilt- it has a new OEM piston and rings (from Jean-Simon Bertrand), new Nachi 6203 bearings, new seals and gaskets, fully adjustable carburetor from Mastermind, non-limited ignition from a 395, new OEM muffler, and new OEM air filter and air filter cover.

https://postimage.org/

https://postimage.org/
 
It's a 1998 model that I got locally as a project. It had lost the PTO side bearing but it hadn't totally failed yet. The cylinder is pristine and the old piston was fine but had some carbon marks on the skirt. The second picture shows the high-speed adjust screw.

https://postimage.org/

https://postimage.org/
 
What kind of firearms are you looking for? I have a old Winchester lever action 30-30, an over and under 12 gauge,and a high end pcp pellet rifle
 
Back
Top