I sure could use some help with my carb settings on a 266xp

[Brewmaster]

Stripped it down and rebuilt it and haven't been able to beg up a shop manual for it.

I set the carb at -1(H),-1.25(L)

I just need to know what spec is thanks in advance.

Husqvarna 266xp

 

[Zippy]

Carb standard settings for 266

h = 3/4
L = 1

 

[hamish]

Zippy has er pegged!

 

[Brewmaster]

h = 3/4
L = 1

Thanks a Ton ... now ... -1 would be richer than -3/4 ... right ... not leaner?

 

[komatsuvarna]

Thanks a Ton ... now ... -1 would be richer than -3/4 ... right ... not leaner?

In/tighten would be lean. Out/loosen will be richer.

 

[Brewmaster]

In/tighten would be lean. Out/loosen will be richer.

Thanks ... I always figure it out ... but ... duh ... that helps ... tighten = restriction = leaner ... looser = open = rich ...

I appreciate it.