Landa pump won't come off

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Michael G

ArboristSite Operative
Joined
Jan 17, 2017
Messages
132
Reaction score
60
Location
GA
Anyone deal with something like this? Pump is a LG3030G trying to rebuild it but can't get pump off.

Can't find a set screw or anything like that, tried to pry it off hard as I can, no give (maybe 1/8").

dXLH5bY.jpg
 
I didn't see a specific listing for your pump.
Maybe one of these links will help?

Your probably dealing with a rusted crankshaft in the pto side of the engine.
So getting some penetrating oil on things, would be something I'd want to happen, before doing any pulling, prying or pushing.

I would look to see if there are any, threaded, push bolt holes
in the pump body to help with the removal (mentioned in the PDF).

http://www.pwoutlet.com/Pressure-Washer-Pump-Removal-Installation-Instructions-s/98.htm

http://www.etscompany.com/Direct_Drive_Pump_Removal.pdf

Heck, Youtube might have a video, as you may have already found out...
Just finding it is the problem! Always fun with guessing how the name or words were misspelled, to search for it.
 
I didn't see a specific listing for your pump.
Maybe one of these links will help?

Your probably dealing with a rusted crankshaft in the pto side of the engine.
So getting some penetrating oil on things, would be something I'd want to happen, before doing any pulling, prying or pushing.

I would look to see if there are any, threaded, push bolt holes
in the pump body to help with the removal (mentioned in the PDF).

http://www.pwoutlet.com/Pressure-Washer-Pump-Removal-Installation-Instructions-s/98.htm

http://www.etscompany.com/Direct_Drive_Pump_Removal.pdf

Heck, Youtube might have a video, as you may have already found out...
Just finding it is the problem! Always fun with guessing how the name or words were misspelled, to search for it.


Thanks for the reply. I called Landa and a technician simply told me pop the 4 bolts out to the motor and it should come off. If not, it's just seized.
 

Latest posts

Back
Top