Need help identifying a Husky part

[blsnelling]

I have twice ordered the little red plastic support ring that goes in the mouth of a 357XP intake bellows. Both times I have received a muffler bracket. The PN on the package is correct. Can someone tell me what model this bracket comes from? BTW, the parts were ordered from Jacks Small Engines. I have ordered this same part from them several times before without issue.

 

[HiOctane]

Looks like 272.

 

[dsell]

503535901 support bracket if HiOctane is correct. The first two and last two numbers match, the rest is inmaterial. I have a 272 if you need measurements to check.

268 (1993-09)
268 (1997-01)
268 K (1997-01)
272 (1993-01)
272 K (1997-01)
272 S (1995-12)
272 S (1997-01)
272 XP (1997-01)
61 (1993-09)
61 (1997-01)

 

[Chris J.]

I was wondering in Husqvarna accidentally duplicated the part number. But per two Husqvarna 272 IPLs, 1997-2001, & 2009, the bracket part # is 503 53 59-01.

Brad, per the Husky 357XP for 2004-2005 the part your wanting is listed as 503 92 88-01. Per the 2010 IPL it's 504 06 44-01. I don't know it this helps, or further muddies the water.

My quess is someone used the incorrect package, apparently at least twice.

 

[blsnelling]

You're exactly right. The PNs aren't even remotely similar. Thanks for the help.

 

[blsnelling]

I might try ordering 503 92 88-01.

 

[blsnelling]

That won't work either. 503 92 88-01 supersedes to 504 06 44-01.

 

[Chris J.]

Confusing IPLs are a PITA.

 

[blsnelling]

I talked to Jack's customer service and they're looking into it.

 

[A100HVA]

503 92 88-01 = blue ring
my guess is 504 06 44-01 = red ring
just checked on availability,says they got them. maybe part number change is color?

 

[redoakneck]

Do you really need those rings?? Doesn't seem like they do anything???

 

[blsnelling]

They're on nearly every saw currently made. They prevent the possibility of the boot pulling in under vacuum and creating an air leak.

 

[stubnail67]

That's a smokin 340 video you posted Brad....ever do and echo cs 400?any ways great video that saw sounded and cut great!

 

[blsnelling]

Thanks. No I haven't.

 

[spudulike]

It also looks very similar to the muffler support on a Jonnie 630!

 

[Mattyo]

That's a smokin 340 video you posted Brad....ever do and echo cs 400?any ways great video that saw sounded and cut great!

cs-400 ...not an easy saw to mod, but supposedly if you open up the muffler it helps A LOT. I didn't touch the muffler on the one I did, but it is quite restricted. I liked the cs-400 for a number of reasons, but the power was quite lacking. just fyi

yes, brads 340/346xp looks hot and minty fresh.

 

[Mattyo]

ereplacementparts?


http://www.ereplacementparts.com/ring-p-617974.html

seems like they got what you need Brad