• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell NOS Bars for Stihl, Husqvarna, Echo, John Deere, + milling chain

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Brushwacker

Addicted to ArboristSite
AS Supporting Member.
Joined
Jun 25, 2006
Messages
4,101
Reaction score
1,851
Location
Medaryville, IN USA
Still have more bars then I need and I need funds. I am offering chain loops with the bars for convenience and not looking to sell the chains without a bar as of now. Same with sprockets I have.
#1 Someone buy the nice 20" 3/8 .050 NOS large mount Husqvarna bar on top, it is an GB Austraila titanium bar painted for Husky OEM $45.00
#2 NOS Stihl OEM ROLLOMATIC E 3003 mount, 026 through ms660, 20" 3/8 .050 Some faint scratches but unused. $39.00
#3 D025 For Stihl 026 to ms660 Oregon Power Match 20" 3/8 .050 NOS few tiny scratches but nice and unused $40.00
#4 D025 Fits " " " " Oregon PRO LITE 18" .325 .063 NOS Faint scratches and scuffs and faint streaks of light surface rust on paint. Sprocket turns smooth and clean. $32.00
#5 is an ArborPro Laminate made in Taiwan.For Stihl 026 to ms660 16" 3/8 .050 New Condition $20.00
Chains with a bar 3/8: 20" Woodland Pro Semi Chisel $15.00 or Oregon Full Chisel $17.00
For 18" .325 Stihl RM or RMC3 $21.00 or Windsor Semi chisel $15.00
For 16" 3/8 Stihl RMC $17.00
Have a few spur sprockets and rims for various models, see pic, prices will vary.
More coming...
 

Attachments

  • DSCN2154.JPG
    DSCN2154.JPG
    168.7 KB · Views: 123
  • DSCN2157.JPG
    DSCN2157.JPG
    134.6 KB · Views: 94
  • DSCN2158.JPG
    DSCN2158.JPG
    144.9 KB · Views: 89
  • DSCN2156.JPG
    DSCN2156.JPG
    130.1 KB · Views: 86
  • DSCN2155.JPG
    DSCN2155.JPG
    136 KB · Views: 85
  • DSCN2090.JPG
    DSCN2090.JPG
    154.4 KB · Views: 85
  • DSCN2168.JPG
    DSCN2168.JPG
    153.4 KB · Views: 85
  • DSCN2192.JPG
    DSCN2192.JPG
    150.5 KB · Views: 91
  • DSCN2193.JPG
    DSCN2193.JPG
    156 KB · Views: 86
Here is the Echo- John Deere bars ( fit older models like 602 EVL, 650 and 660, JD 60 or 70V , and many more.) I think 1 or 2 of these may have the slot to work on McCulloch. If not I have a NOS 16" OEM Mcculloch bar also .
All are 16" 3/8 60dl, 3 are NOS, 1 good used is the same as the new Oregon sprocket nose with the exception of the shape of the replacable nose.
Windsor or black OEM Echo bars $20.00 each
NOS Oregon sprocketnose $25.00
Used Oregon sprocket nose $10.00
More Stihl mount bars coming up...
 

Attachments

  • DSCN2172.JPG
    DSCN2172.JPG
    157.5 KB · Views: 39
  • DSCN2174.JPG
    DSCN2174.JPG
    153.8 KB · Views: 36
  • DSCN2175.JPG
    DSCN2175.JPG
    166.1 KB · Views: 33
  • DSCN2179.JPG
    DSCN2179.JPG
    160.2 KB · Views: 38
  • DSCN2181.JPG
    DSCN2181.JPG
    148.5 KB · Views: 34
  • DSCN2183.JPG
    DSCN2183.JPG
    137.7 KB · Views: 35
  • DSCN2186.JPG
    DSCN2186.JPG
    142.1 KB · Views: 35
  • DSCN2184.JPG
    DSCN2184.JPG
    148.9 KB · Views: 36
  • DSCN2188.JPG
    DSCN2188.JPG
    140.9 KB · Views: 33
  • DSCN2189.JPG
    DSCN2189.JPG
    145.8 KB · Views: 32
1, D025 mount for 026 to ms661, NOS 24" 3/8 .050 Oregon Powermatch. A bit of light paint chipping and scratches from shelf life. Everything feels nice and smooth and still looks good for a work saw. $45.00
1, NOS ArborPro Laminate D025 mount for 026 to ms661, NOS 24" 3/8 .050, A touch of surface rust on the rivets. I have another 1 of these in Husky large mount and black paint. $32 each
I have 24" Woodland Pro Semi chisel and 1 full chisel to go with bars at $15 each.
Also have 1 of each partial 25' reels of milling chain either 3/8 .050 or .058. Will price reasonable if interested.
1, 12" .043 Picco bar and Woodland Pro semi chisel chain combo $38.00 ( I have 3 or so of these combo's for sale ).
Have a few small mount Echo bars hanging out aiming to add here at a later time, ask if interested sooner.
Shipping cost to be added on all my prices.
 

Attachments

  • DSCN2159.JPG
    DSCN2159.JPG
    84 KB · Views: 68
  • DSCN2164.JPG
    DSCN2164.JPG
    136.1 KB · Views: 70
  • DSCN2165.JPG
    DSCN2165.JPG
    172 KB · Views: 69
  • DSCN2167.JPG
    DSCN2167.JPG
    168.5 KB · Views: 61
  • DSCN2168.JPG
    DSCN2168.JPG
    153.8 KB · Views: 59
  • DSCN2191.JPG
    DSCN2191.JPG
    166.2 KB · Views: 67
  • DSCN2190.JPG
    DSCN2190.JPG
    155.6 KB · Views: 57
3/8 milling-ripping chain;
.050 gauge: 218 drive links remain ( 25 foot = 410)
$40.00 + shipping for the 218 drive links + 3 connector links.
.058 gauge 18 foot, + 5 connecter links ( will double check measurement if interested ) $55.00
If you want it on the real shipping will be higher. Cheapest and simplest to pack loose chain in a small flat rate box for $6ish for 1 partial reel in the U.S.. I would sell loops for .75 per bar inch ( example a 20" bar chain would be 20 x $.75 = $15.00 ) .
I don't get much use for Echo - JD bars so if any one takes 2, I will drop $5.00
 
#2 NOS Stihl OEM ROLLOMATIC E 3003 mount, 026 through ms660, 20" 3/8 .050 Some faint scratches but unused. $39.00

Price shipped to L0L 1T0 Canada?
 
What brand is the milling chain. I am interested in the .050
The box is labeled GB, but it is Carlton chain.
218 drive links remain ( 25 foot = 410)
$40 + shipping for the 218 drive links + 3 connector links. If you want it on the real in the original box I think shipping will be higher. Cheapest and simplest to pack loose chain in a small flat rate box for $6ish.
 
3/8 milling-ripping chain;
.050 gauge: 218 drive links remain ( 25 foot = 410)
$40.00 + shipping for the 218 drive links + 3 connector links.
.058 gauge 18 foot, + 5 connecter links ( will double check measurement if interested ) $55.00
If you want it on the real shipping will be higher. Cheapest and simplest to pack loose chain in a small flat rate box for $6ish for 1 partial reel in the U.S.. I would sell loops for .75 per bar inch ( example a 20" bar chain would be 20 x $.75 = $15.00 ) .
I don't get much use for Echo - JD bars so if any one takes 2, I will drop $5.00

.050 milling -ripping chain sold

I counted the links of the .058 and re measured. 288 links possibly 290 + 5 connecters ( 2 counts ) just shy of 18 foot. I would do $55 shipped loose in a small flat rate box in the U.S..
 
Will that 20" 3/8 050 bar fit a stock ms 360? do you have aloop of chain that will fit too? if so I am interested? Forgive my ignorance I am newby trying to learn bout it all
thanks, bruce
 
Will that 20" 3/8 050 bar fit a stock ms 360? do you have aloop of chain that will fit too? if so I am interested? Forgive my ignorance I am newby trying to learn bout it all
thanks, bruce
Yes and yes. Still have the OEM Stihl Rollomatic for $39. and the Oregon PowerMatch with a replaceable sprocket nose for $40. I have an Oregon full chisel chain for $17. If you rather have semi chisel I'd have to do some lookin as I sold all from my supply box. Might have 1 in 1 of my trucks. I expect shipping would be 10 to $15. PM me your town and zip if u want me to check.
 
Update what is left for sale:
1, D025 mount for Stihl 026 to ms661, NOS 24" 3/8 .050 Oregon Powermatch. A bit of light paint chipping and scratches from shelf life. Everything feels nice and smooth and still looks good for a work saw. Since this is my last 1 of these and I have a couple chains more then I need I am pricing it as 1 bar and 2 Woodland pro chain combo for $75. (either 2 semi chisel or 1 and 1 full chisel)

#3 D025 For Stihl 026 to ms660 Oregon Power Match 20" 3/8 .050 NOS few tiny scratches but nice and unused $40.00

#4 D025 Fits " " " " Oregon PRO LITE 18" .325 .063 NOS Faint scratches and scuffs and faint streaks of light surface rust on paint. Sprocket turns smooth and clean. $32.00 reduced to $29

1, Stihl OEM 12" .043 Picco bar and Woodland Pro semi chisel chain combo $38.00 reduced to $35. ( I have 3 or so of these combo's for sale ).
Have a few small mount Echo bars and Husqvarna 3/8 lo pro hanging around aiming to add here at a later time, ask if interested sooner.
The 4 16" Echo mount +., (larger saws) are still available (also are listed on ebay), have 16" 60dl Stihl RM chains to go with them $17..
3/8 .05 20" Oregon Full Chisel $17.00
For 18" .325 Stihl RM or RMC3 $21.00 reduced to $19. or Windsor Semi chisel $15.00
Have a few spur sprockets and rims for various models, see pic, prices will vary.
. 058 milling-ripping chain is still available ( also on ebay)
Reminder I am offering the chains and sprockets to be sold with a bar at these prices to make it convenient to replace all at once if I have all u need. Not aiming to sell a sprocket or chain individually.
Shipping cost to be added on all my prices.
 
Back
Top