Ported 661s..

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
20" Tsumura/Total lite - 9pin rim sprocket
20" Stihl RS chain - .050 3/8 72dl
Pine and maple

Tree Monkey 661 - pine 3.35 sec avg, maple - 9.78 sec avg
JMS Saws 661 - pine 3.76 sec avg, maple - 11.31 sec avg



It would have been interesting to see what a stock 661 saw would do in the pine against your saw and one just with a MM.
So you must have made some timed cuts with your saw that same day along with the other two obviously. What was the best time cut in the 30" × 37"?
 
im talking about the first post!!!!!

here is scott's saw in the same wood as brad and jason. it beat them both. and I didn't post it.



It would have been interesting to see what a stock 661 saw would do in the pine against your saw and one just with a MM.
So you must have made some timed cuts with your saw that same day along with the other two obviously. What was the best time cut in the 30" × 37"?

i'm not looking to stir the pot here, but I think this is what your looking for
 
It would have been interesting to see what a stock 661 saw would do in the pine against your saw and one just with a MM.
So you must have made some timed cuts with your saw that same day along with the other two obviously. What was the best time cut in the 30" × 37"?
That was already posted.
 
Status
Not open for further replies.
Back
Top