Post pictures of your woodpile/splitting area

[dancan]

Great pics !

 

[tnflatbed]

I love how massive that 088 looks to the little one

 

[RyeThomas]

Since I got my SSHD I've been scrounging a lot more!

 

[user 122190]

I finished this morning. Thanks to the new log splitter, 8 cords split, sorted and stacked, and I didn't kill myself. I still have maybe 2 cords of fully seasoned bucked logs that I can replenish with, if I start burning early and if the snow holds off.

 

[briantutt]

Cut part of a load today, spent more time moving brush and limbs and grubbing stumps. Got 5 out, about 3 or 4 more to go to get the new road cut.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[briantutt]

Got all the stumps out, good turn around cut. One load of wood in the bag.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[briantutt]

Couple of real big oaks. Dragged that big one that is hollow up onto the road, pissed off a bunch of honey bees in it. Stopped cutting for the day!

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Lowhog]

Splitting area is all over the farm pulling piggyback. Scrounging for dead standing and blow down poplar today.

 

[ri chevy]

Love the double pull setup! [emoji106]

Sent from my SM-G930V using Tapatalk

 

[treebilly]

I like it too. Need to flip the hitch on the splitter around to put you closer to the trailer. But that would eliminate the vertical split option.


Hmmm. Maybe a swivel of some sorts can be designed here.

 

[cantoo]

treebilly, just weld a receiver on the back end of the splitter and a piece of 2" tubing and you have a removable hitch. I weld receivers onto tons of stuff.

 

[cantoo]

In this picture there is a receiver welded onto the grapple. Then a long 2" tube with a bend in it and hitch welded onto it. To use the grapple the 2" tube comes off and mounts into the other 2" receiver welded to the top beam of the grapple.

 

[rarefish383]

That's what I do now also. I got tired of putting a 2" ball on the little JD for one tool, 1 7/8 for another and my stump grinder used a drop pin. Now I have half a dozen draw bars with the proper ball, and just stick them in the receiver. My half cord trailer, the jack stand hung too low, and would dig big divots in the lawn, so I got a 7" drop draw bar and flipped it upside down and made a 7" lift. Now no more divots, Joe.

 

[foxtrot5]

I was having some issues uploading to the site here so I hosted my pile photos elsewhere. All of this was scrounged up for free locally so it's an eclectic mix of woods but it's mine and I like it. https://imgur.com/a/KI4kj

 

[Waitingoneden]

Getting started for next year.


Sent from my iPhone using Tapatalk

 

[foxtrot5]

Getting started for next year.


Sent from my iPhone using Tapatalk

Always a good feeling when the truck squats from the load!

 

[TeeMan]

My neighbor's Elm was starting to rot at the base. A windstorm blew it over...right over my fence and shed. Luckily the shed had no damage and I only had to replace three fence boards on the fence. The neighbor knew a tree service that does work for the local utility, so they came out and removed all the limbs and safely dropped the remaining trunk. They cleaned up all the limbs, and cut most of the trunk into rounds. I finished the remaining cutting on the rest and will be keeping all the wood for firewood. This tree literally fell on my fire pit!

 

[Waitingoneden]

Always a good feeling when the truck squats from the load!

It is but that's not from the wood. It's from the wood splitter!


Sent from my iPhone using Tapatalk

 

[Ranchers-son]

My best buds in front of the stack and pics of the wood shed.

 

[95custmz]

That wood shed's getting full. Glad to see you have some help.