poulan pro that looks like a p65 s/n.530-029086

[plowboy]

a friend sold me a bunch of stuff his dad had for $100 .1 was a old poulan pro with a dr.sprocket rim an bow with two chains .i would like to put a bar on it an use it as a big cut down saw ,an a ak.saw mill.what mod no. would it be an what bar would fit the chain an saw if you hang the chain on a nail it is 30" long.

 

[Scooterbum]

Need some pictures.

 

[doc874]

Does it look like this?? Poulan bought out Pioneer back in early 80's and rebadged some of the saws "Poulan" nowadays poulan and Husqvarna saws are Electrolux products, imagine a "sucker that cuts"!





Home | Chain Saws | Chain Saw Chain | Bar Mount Patterns | Carburetors | Manufacturers | Trademarks | Collectors | Bulletins | Events | Stolen Saws | Chain Saw Age Reprints | Newsletter | Marketplace | Parts Sources | Cartoons | Links | Your Host

--------------------------------------------------------------------------------



Model: 655

--------------------------------------------------------------------------------
MANUFACTURED BY: Poulan PRO
NASHVILLE, ARKANSAS U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED: 1988
YEAR DISCONTINUED:
ENGINE DISPLACEMENT: 6.0 cu. in.
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 2.250 in. (57.1 mm)
PISTON STROKE: 1.500 in. (38.1 mm)
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Reed valve
MANUFACTURER ADVERTISED H.P.: not advertised
WEIGHT : 18.3 lbs. (8.3 Kg) powerhead only
OPERATOR CONFIGURATION: One Man operation
HANDLEBAR SYSTEM: Anti-vibration, 6 rubber elements
CHAIN BRAKE: Manual
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die cast magnesium, injection molded polymer
MAGNETO TYPE: Electronic, Phelon CD
CARBURETOR: Walbro WJ
MAJOR REPAIR KIT: K10-WJ
MINOR REPAIR KIT: D10-WJ
AIR FILTER SYSTEM: Cellulose fiber element (Feutron)
STARTER TYPE: Automatic rewind
OIL PUMP: Automatic, gear driven adjustable with manual override
OPERATING RPM: 9,000, 12,500 free speed
IGNITION TIMING: fixed
BREAKER POINT SETTING: none
FLYWHEEL/COIL AIR GAP: 0.010 to 0.015 in. (0.25 to 0.38 mm)
SPARK PLUG TYPE: Champion RCJ-7Y, KCJ7Y
SPARK PLUG GAP: 0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY: 33.1 fl. oz. (940 ml)
FUEL OIL RATIO: 50:1
RECOMMENDED FUEL OCTANE: Regular grade
MIX OIL SPECIFICATION: Poulan PRO chain saw mix oil
CHAIN PITCH: 3/8 in. or .404 in.
CHAIN TYPE: Oregon 73LG or 51L
BAR MOUNT PATTERN: 20 link
SHORTEST GUIDE BAR SUPPLIED: 20 in. (50 cm)
LONGEST GUIDE BAR SUPPLIED: 36 in. (91 cm)
COLOUR SCHEME: Poulan PRO Yellow with Grey, later Black
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

--------------------------------------------------------------------------------
COMMENTS:

--------------------------------------------------------------------------------




Reproduction of this World Wide Web Site in whole or in part is prohibited without permission.
Copyright © 2000-2007 MIKE ACRES - All rights are reserved.

 

[plowboy]

that it but it has a oiler butten

yes but it has a oiler buttom up on the frunt bar

 

[Scooterbum]

Like this?

 

[plowboy]

that it

my saw is missing the brack too .my saw has what i think is a stihl bow an want to switch back an forth useing the sam chain, both are brad new chisel cut teeth an is 30" when hung on a nail what leath bar do i order?