Discussion in 'TreeStuff.com' started by palbin, Mar 8, 2015.
Do you sell "Pressure vacuum tester for Husky" OEM 531 03 06-23?
this is a mityvac tester but the husqy sell it like the stihl , now if you want to pay double order it from a dealer
Ahaa - Husky sell a Mityvac tester - very funny - what spec-
imen of Mityvac tester is then - do you happen to know?
(Is it e.g., the "Mityvac MV8510" I have seen about in other
Man the husqvarna sell this about 200 + euros , doesnt matter if its MV 8510 , its just double price
Mitivac 8500 is what I use. Works good.
Yes _ I will by Mitivac 8500 then also - thanks - in Sweden
small-turn-around/over-stuff like this cost A LOT - things
that sell a lot more the market has taken down the prices
for to what they should be - but not on these kind of stuff -
for example I found Mitivac kit domestically for 200 + eur
60.00 American here. http://www.amazon.com/Mityvac-MITMV8500-Silverline-Automotive-Vacuum/dp/B0002SQYUA
Thanks - very kind of you - unfortunately many Amazon.com
items do not ship to Sweden - which includes this item --- .
I will buy it hear instead I recko'n - more or less same price,
but also including outspoken shippin and import information
That is a great tool for troubleshooting saws.
There seems to be another kit Mityvac MV8550 which is
supposed to be sturdier made with more metal sort of
Costs 30 EUR or so more, but possibly could be worth it?
It says it has a higher pressure ability than the 8500 which will not matter for saws. Now if you use it for automotive it prob would matter.
Whatabout the Mityvac 5530 compression test kit by the way?
Cost a somewhat steep 100 EUR or so - but seems to include
several quite useful test hoses etc which would otherwise cost
some money ... .
(Obviously - the Mityvac 8500 and 8550 kits do not test comp-
ression I assume ... ?)
I am not familiar with that one. I use a Snap on compression tester.
its the most importand tool for saw service
No compression test
i dont use a compression tester.
I seen scored pistons and cylinders that had 150- 160 .
And even with that tool there will be saws that cant be figured out so fast.
OK - interesting info - perhaps I scip that one then
- anyway one can have a non-branded one locally
quite cheaply ... .
just because the rings are not stuck
Separate names with a comma.