Salsco 810 xt roller feed problems

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dane d

New Member
Joined
Apr 21, 2017
Messages
3
Reaction score
0
Location
Smithers bc Canada
i have an 810 xt chipper and the roller feed has recently stopped working or is very very weak.

Does anybody have any advice ?
The chipper only has 800 hours
 
Are there any other hydraulic features to the chipper? If so, are they acting weak? If they are, you may have a hydraulic pump that is bad.

Hope this helps!

Dave
Global Equipment Exporters
770-420-6400
 
Are there any other hydraulic features to the chipper? If so, are they acting weak? If they are, you may have a hydraulic pump that is bad.

Hope this helps!

Dave
Global Equipment Exporters
770-420-6400

Hey Dave. The only other hydraulic components are the two cylinders that lift the feed wheels and they work great. The feed wheels spin but when a piece of debris is placed in the machine the roller feed jams and stops. There is a hissing sound coming from the control valve where the stop, forward and reverse bar is connected to.
 
Back
Top