Saws I want. YOU???

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Need to fill out the line-up with a big saw. 7900, 460 or 576xp would be all that I would be able to reasonably justify with the size wood I cut.
 
want/need ms460 660 and one day 880 then an 090

but if i had the money,i'd need to fill up our 550 gallon tank and get a 55 gallon drum of 2-stroke,and 550 gallons of bar oil but it's only a wish
 
my list

in this order
MS880 96" Bar
MS660 42" Bar
Dolmar PS-9010 42" Bar
Solo 694 42"Bar

:greenchainsaw::greenchainsaw:
 
****

Soooo, after reading, and I figger'd this would happen... Add a Dolmar 166 to that and a Stihl 090. BIG!!!! Anything big and torquey. I used to use an old Poulan, that sucker ran great. Bout 25 yrs old it'd be now, manual oiler, but it ran really really good. Seemed like it was about 60cc's or something. I'd like that have one of those old buggers too. Someday I'd like to find an old 2 man saw, just for looks to hang on the wall. Like sawneck's Maul that used to hang on the wall... hehehehehehehe

:cheers: eh?
 
Me, i don't want no more saws, i got 4*066s, 3-064s,046,044, 024 and parts to build more 44s and 46s and 064s, got 372s and parts to build about 4 more, a 262, 266, 268, 272s, 288, couple big jonsereds.
Seems like i go in cycles, first after veitnam in 69 it was drag racing, then fishing and quail hunting and raising bird dogs, then the beagles and rabbit hunting. Then went to restoring camaros and a couple years ago it was building a sawmill and cutting lumber, that got me in repairing chainsaws.
Now i've got a 68 corvette to restore and don't want to see any more saws.
 
Ummmmmmm

Me, i don't want no more saws, i got 4*066s, 3-064s,046,044, 024 and parts to build more 44s and 46s and 064s, got 372s and parts to build about 4 more, a 262, 266, 268, 272s, 288, couple big jonsereds.
Seems like i go in cycles, first after veitnam in 69 it was drag racing, then fishing and quail hunting and raising bird dogs, then the beagles and rabbit hunting. Then went to restoring camaros and a couple years ago it was building a sawmill and cutting lumber, that got me in repairing chainsaws.
Now i've got a 68 corvette to restore and don't want to see any more saws.

Dude? I hate to say this, buttttttt... Since you got all them saw and don't want any, why'd you post that you didn't? I don't see an 090 in your arsenal. Ya'll get some HUGE red pines down there. An 090 would be good for them I'm sure... Or an 880. hehehehehehe

:cheers: eh?

Ever been to the cheetah? lmao That's like my favorite place to go when I'm in Atlanta...
 
Being a miller with an 441, an 066, an 880 and an 076, and access to a bunch of other stuff, I have little interest in saws less than about 70 cc.
I've played with enough huskies not to yearn for any,
and the rest . . . . . well . . . . yawn, . . . . .
YIKES
:jawdrop:
. . . . . am on the way to CAD cure ?
No . . . .Wait . . . . ,
A 395 would be very cool to have
An old big Mac would be an interesting proposition
So would an 090!
No worries, rest assured, I can sense a relapse
 
Is it too much to ask?????????

Dolmar KMS-4, 166
Husqvarna 2100XP/2101XP
Solo 611 Twin
McCulloch 125CP/125SP
Jonsered 111S
Stihl MS660

Edit:- Stihl 076 as I have a brand new P&C kit for one!
 
Last edited:

Latest posts

Back
Top