SS Washers And How To Order Them

[Stihl 041S]

You need 1 washer and 1 shim for each grinder.

Madsaw, Evin, and Ms-310; I will take it you each want 1 set unless you say different.

Email or PM me with your address, I'll send them and mail $3.00 to the return address on the package, who ever it is.

Don't send checks, I'm not good with them, its easier if you don't send anything. I'll lose the check and just upset you and I don't want to do that.

So just let me know the number you need.

Since I'm so late, just let me know if you any number up to 10.

I'll Email you back when I send out your parts.

Thanks for understanding for the delay.

Rob

 

[Stihl 041S]

The washers are for the NH grinder

 

[Evin]

Thank you so much. Yes I only need 1.

 

[Stihl 041S]

You got it.

 

[Stihl 041S]

Russ61;
Got your message, you'll get your parts.
Rob

 

[MS-310]

Just 1 thanks alot,

Jack

 

[ryno]

I have a NH grinder. What are these washers for? Why do they need to be replaced?

 

[PA Plumber]

I have a NH grinder. What are these washers for? Why do they need to be replaced?

You can start here...

http://www.arboristsite.com/showthread.php?t=39995&page=19&highlight=northern+tool+grinder

There is a lot of good info in the above thread. You just have to patiently work through it.

 

[Stihl 041S]

Thanks TY; I just make the things, I hand file my chains.

 

[PA Plumber]

I tried to always file my felling saw chains by hand. After bumping a glass wire insulator, a couple of wires, and a screw while cutting last week, I have chainged my mind on that!

Hand filing leaves a sharper edges, but that grinder sure makes it nice for cleaning up a chain a bit.

 

[Stihl 041S]

I know I should get one, it would be a lot easier to fix abused chains.

 

[Stihl 041S]

b1rdman;
You are in the loop

 

[Stihl 041S]

buck-g;

You are in the loop for parts.

 

[Stihl 041S]

ryno;

You got a washer set in the mail

 

[Stihl 041S]

Anybody need a washer for their Northern Hydraulics chain grinder? I'm going to send a batch to RBW for the shims.

Rob

 

[parrisw]

I need shims for 1 grinder. I tried to get them from you before with no luck, are you making them again??

Thanks

Will

 

[DOLMARatOs]

I've found that milling them works well too if one has access to the tooling. Hey, I think you sent me a washer but I didn't pay. I'm sorry. PM me your address and I'll send the money ASAP. Sorry for being a deadbeat. lol

:censored:

 

[Stihl 041S]

Don't worry, I didn't get the others you wanted, so I must be the deadbeat.

Rob

 

[Sprig]

Stand up!

Hey Rob I just wanted to comment on your effort to get things right and help out the folks, kudos to ya mon! Really a nice thing ta see.



Serge

 

[parrisw]

Don't worry, I didn't get the others you wanted, so I must be the deadbeat.

Rob

Was this for me? I wasn't in anyway trying to slag you. I m just interested in getting a set made if your doing it?

Thanks

Will