stihl 012 av parts list & instruction manual

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bluefox

ArboristSite Lurker
Joined
Feb 13, 2005
Messages
10
Reaction score
0
Location
Tielt Belgium
:blob2: Hello, :blob2:
I am looking for an instruction/ workshop/parts list/drawings/ book for my (old) stihl 012av.
Can somebody help me with this? Or from a similar saw?
I have a 012 that needs some attention.
thanks!!!!
Franky
 
thanks a lot Tom,
I have found the parts list but would there be a service manual in there also?
I have found the 09/010/011 but the 012 is not mentioned i think.

regards,
franky
 
I don't have the 012 Service Workshop manual yet to put out there. Always looking for folks to get the info to me or links to where I can find it so we can share info.

Tom
 
any idea what type of bar that would fit on the 012? I also haven't found any technical specifications of this machine. Who can help??
thx
 
The ipl shows a .325 sprocket, and another which is likely 3/8 lo pro {picco}.
So you need to know which chain/sprocket you have. But the bar/chain
combos that fit the 025 will work, as the 025 came out with either, mostly
.325.
 
Oregon suggest 3/8" (.370) low-profile west of the Atlantic, and .325" east of it. Stihl lists both options in their bar selection guide. If your sprocket is 3/8", it probably has 6 teeth on it - if it is .325 it probably has 7. If the drive sprocket is worn it should be changed anyway - which should give you the choise between installing either pitch.

Anyway, if you are not capable of finding out what you need, I strongly suggest that you take the saw to a Stihl dealer.
 
Last edited:
Do you still have either the original chain or bar?
If so, post any numbers you find on them.

If not, any numbers on the sprocket?
The chain , if Stihl would have the pitch on the side of the cutter, and a 3, 5, of 6
stamped on the drive link, standing for 1.3= .50 ga. 1.5=.58 ga. 1.6=.063

If it says picco on the bar anywhere, then it is the lo pro 3/8 chain
 

Latest posts

Back
Top