W walterg ArboristSite Operative Joined Mar 3, 2015 Messages 282 Reaction score 146 Location eastern nc Mar 5, 2015 #1 I put a China made carb on my 021. Are they pre adjusted, or do I need to set it before I start the saw.
I put a China made carb on my 021. Are they pre adjusted, or do I need to set it before I start the saw.
dougand3 Addicted to ArboristSite Joined Feb 24, 2014 Messages 1,139 Reaction score 783 Location North Alabama Mar 5, 2015 #2 Check that H-L screws are approx 1.5 turns out (CCW) from lightly seated. Get saw to operating temp and tune.
Check that H-L screws are approx 1.5 turns out (CCW) from lightly seated. Get saw to operating temp and tune.
W walterg ArboristSite Operative Joined Mar 3, 2015 Messages 282 Reaction score 146 Location eastern nc Mar 5, 2015 #3 Thank you . I will.