Stihl 3003 mount, bar weights

[Trigger-Time]

Was cleaning in saw shed today, noticed I was missing a couple of bars.
After I found then I was thinking about TS's thread on Stihl's New Light bar.

So I put some bars on the scale.
For the few that don't know 3003 bars fit Stihl
saw from 026/MS260 up to and including 066/MS660
All the bars where made in West Germany
The 14in .325 and 20in 3/8 .050 Picco are NLA in USA but 16in Picco is still available in USA.
All bars besides Picco bars are .063

weights

14" .325 E.............1# 14.4oz
16" Picco E............1# 7.0oz
16" 3/8 E.............1# 11.4oz
16" 3/8 ES............2# 0.8oz
18" .325 E.............2# 1.6oz
18" 3/8 ES............2# 6.6oz
20" Picco E...........1# 13.2oz
20" 3/8 ES...........2# 12.0oz 11 tooth nose sprocket
24" 3/8 ES...........3# 12.6oz 13 tooth nose sprocket

Not much you can do with this info, but what the heck

TT

 

[SawTroll]

It just means that you should go with the "E" bars, unless the bar is short for the saw - thanks for posting!

 

[Tzed250]

.


The E bars are flimsy toys...


.