The Beg for Manuals Thread

Rugged made
Treestuff
Wesspur
Advertise with us
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Beggin' for mo manuals

May I have shop manuals and IPL for;
Stihl 019T, MS170, MS131, and a 028 WoodBoss
Thanks as always, everybody!
 
Question on fine points of 066 repair.

On an 064/066/660 there is a small brass nipple that goes into the crankcase to provide impulse to the carb via a tube. Is that nipple pressed or screwed into the case?

The two long bolts that hold the carb down. Are they permanantly molded into the carb upright or can they be pressed out of the upright and replaced?

Thanks for any answers on this.

Also any IPL manual on the 066 and MS660 MS880 are greatly appreciated.
 
binthere222 said:
On an 064/066/660 there is a small brass nipple that goes into the crankcase to provide impulse to the carb via a tube. Is that nipple pressed or screwed into the case?

The two long bolts that hold the carb down. Are they permanantly molded into the carb upright or can they be pressed out of the upright and replaced?

Thanks for any answers on this.

Also any IPL manual on the 066 and MS660 MS880 are greatly appreciated.
Click to expand...

The collar screws for the carb as well as the impulse nipple (connector) are pressed in.
Hello ca then tx then va.
:blob2::blob2:
 
Service and parts for MS361 please.

Looking for any Stihl info in the archives and came across the below:

"So it would probably be best to have a member request what he needs in this thread and have someone PM him on how to get it. The advertised location of Copyrighted info might put you in contact with Stihls lawyers. And those links being provided in this forum might get AS in some hot water."

So, I guess I will beg - Service and parts for MS361 please. Thanks
 
weldguy said:
Looking for any Stihl info in the archives and came across the below:

"So it would probably be best to have a member request what he needs in this thread and have someone PM him on how to get it. The advertised location of Copyrighted info might put you in contact with Stihls lawyers. And those links being provided in this forum might get AS in some hot water."

So, I guess I will beg - Service and parts for MS361 please. Thanks
Click to expand...

Hello and welcome Michigan.
 
Hi guys -

I came across an 026 Pro today & sure could use the shop manual & IPL. L'il help?

Thanks,

Ma
 
Stihl 056 super

I just got a basket case Stihl 056 Super today- I would greatly appreciate any help.
 

Latest posts

Back
Top