NE 346XP - Affects of Cat Muffler & Muffler Mod - Porting & Popup To Come
- Thread starter blsnelling
- Start date
Help Support Arborist Forum:
Banacanin
Addicted to ArboristSite
Hmmmmmmmmm.......................If you would only listen ............Glad you finally figured it out.....
I guess now that Brad said it.... Its cut in stone ..........
...
Where's your video?
Trigger Man
Addicted to ArboristSite
One more question Brad, considering all the saws you have had in your hands, which bone stock saw would a guy have to buy to compare to a muff modded 346xpNE?(which saw would you compare it to?) Not trying start a fight over brands, just asking your opinion, which I value! Thanks.
woodgrenade
ArboristSite Guru
Thanks for the pictures.
AUSSIE1
Al.
- Joined
- Aug 25, 2006
- Messages
- 8,004
- Reaction score
- 1,979
Deflector-5030783-01
Screen-5034056-01
Screen-5034056-01
The deflector is PN 503 58 99-01 and costs me $8.74.
The spark arrestor screen is PN 503 40 56-01 and costs me $4.97.
The screws are from the hardware store.
The spark arrestor screen is PN 503 40 56-01 and costs me $4.97.
The screws are from the hardware store.
That deflector is much more expensive at $13.96. There are others as well, but all more expensive.
Last edited:
and how much should you open up a stocker
I would at least try to answer that, but it would take the thread in a direction I don't really want to go.
This saw is stock in the video. Go ahead and open it up the entire area of the deflector. Just hold it back a little from the front edge since the deflector doesn't cover all the way forward.
Trigger Man
Addicted to ArboristSite
That's fine Brad,I don't want to put you in Hot Water.
It's not that. I just know where the thread will go.
Trigger Man
Addicted to ArboristSite
Is the unlimited coil a must for the muff mod?
now we really want to know
joatmon
Addicted to ArboristSite
Brad,
Are you doing this for Niko's benefit? He's the only one that would cut wood that size.
Carry on,
ole joat
sachsmo
Addicted to ArboristSite
Hole size?
359 EPA
I'm no expert,
I went by the theory bigger is better!
(I know, I know I weld like crap, but she runs gooood)
Mine has .750 I.D. tube running through the inside "baffle plate", with a flare on the side closest to the port. Basically a straight pipe, it's not butted against the flange, so I suppose some will still exit the stock (through the straw) location.
359 EPA
I'm no expert,
I went by the theory bigger is better!
(I know, I know I weld like crap, but she runs gooood)
Mine has .750 I.D. tube running through the inside "baffle plate", with a flare on the side closest to the port. Basically a straight pipe, it's not butted against the flange, so I suppose some will still exit the stock (through the straw) location.
SawTroll
Information Collector
Birch that size turns into good firewood when dry, so I don't leave tops and branches that size in the woods....
Last edited:
joatmon
Addicted to ArboristSite
Birch that size turns into good firewood when dry, so I don't leave it in the woods....
Good deal ole buddy. Just had to let you and Brad know I was paying attention.
harrybeaver
ArboristSite Operative
I put those numbers into the search on Baileys web site nothing came back. Then I typed in the names and was able to find the deflector but I am still not able to find the screen. Can you recommend a supplier? Thanks
Similar threads
