Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'm looking for a Husky 2100 and Homelite 410 chainbrake assy. 8800/540 project would be nice also.

Plenty to trade.
 
Looking for a clutch side case half, chain guide-plate, and complete brake assembly. (handle to the band) 365, 372 etc.

This saw has been a lesson in what to look for when buying used..lol

attachment.php
 
Last edited:
Looking for a clutch side case half, chain guide-plate, and complete brake assembly. (handle to the band) 365, 372 etc.

This saw has been a lesson in what to look for when buying used..lol

attachment.php

I've got one from a 371k that I believe should be the same
 
I've got one from a 371k that I believe should be the same

If not, I have one somewhere.

Thank you. This project has gone way over what I wanted and has just become more and more depressing the further I have dug into it. On the good side, when I'm done, I will actually have something that will last.

Please let me know what you come up with. All I have to offer in trade at this point for saws is freeing up some space in your shops and cash.

Thank you, Robert
 
Thank you. This project has gone way over what I wanted and has just become more and more depressing the further I have dug into it. On the good side, when I'm done, I will actually have something that will last.

Please let me know what you come up with. All I have to offer in trade at this point for saws is freeing up some space in your shops and cash.

Thank you, Robert

You will, of course, be required to post pictures of your project here. Especially if one of us hooks you up with a case half. :)
 
Thank you. This project has gone way over what I wanted and has just become more and more depressing the further I have dug into it. On the good side, when I'm done, I will actually have something that will last.

Please let me know what you come up with. All I have to offer in trade at this point for saws is freeing up some space in your shops and cash.

Thank you, Robert

I got one that isn't cracked but it will need a thread insert for the top inside dawg bolt. You can have it for shipping cost.
 
HD-5 up for swap

I have a nice Walbro HD-5 (45mm) Carb just rebuilt, for an 029-039 series saws.
 
Last edited:
i may be interested,i am putting one back together for a fellow as member that leaned the saw i sold him out and cooked the piston and cylinder. let me know what you need for it and i will pass it along to him.
 
Still hunting parts for 371 husky

Need a clutch drum and 3/8 sprocket, Oiler and gear, Chainbrake assembly (handle to band). Felling dogs, and any bolts available. Trade, Buy, Beg, Borrow, you name it. This project may be worse than I expected. I may have bit off more than I can chew this time. But I guess you gotta try something.

Casey
 
Last edited:
Back
Top