roncoinc
Official Stihl Disser
supposed to be an HK-12
but two flavors,one has a plastic spacer under metering diaphram and other has metal and the gaskets from them to the carb body are different.
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
supposed to be an HK-12
but two flavors,one has a plastic spacer under metering diaphram and other has metal and the gaskets from them to the carb body are different.
The best thing you can do for those carbs is to replace the ,module, as a whole piece, they are just plain pain in the azz otherwise. The needle seats wear out on them.
- Joined
- Feb 17, 2009
- Messages
- 16,719
- Reaction score
- 15,989
- Location
- Beautiful Rockbound Coast of Maine
Block off plate can be as simple as a piece of rubber bicycle inner tube sandwiched between the carb and intake....and/or muffler and cyl port.....doesn't take much for tools..and I have a metal oringed piston stop with a hose barb built into it to hook the pump to....paid like $8.00 from Northwoods Saw...
Get a replacement ,module, from Tillotson Trailee Ireland. The needle seat wears out on the module and it will continually flood.
roncoinc
Official Stihl Disser
Then this carb does have the wrong lever,it's NOT shaped like the one in the plastic "module" ..
Off to the W thing, its a real nice day out there. BBL.
- Joined
- Feb 17, 2009
- Messages
- 16,719
- Reaction score
- 15,989
- Location
- Beautiful Rockbound Coast of Maine
I knew you posted about this somewhere before.....good info!!
Gotta get off to the "J" thing...gotts "W" to do.......Have a good day guys....
roncoinc
Official Stihl Disser
this is a pretty low hour saw so i'm thinking hopefully not wore out yet
wonder if i could put on the plastic spacer ?? with correct gasket...
or rebuild a plastic spacer carb and put it on...that would work.
tnx for looking.
Morning guys.
Robin, thanks for the landy info.
I think I will go with an old ford f250 (late 80s) to start with, and look for a landy later.
There is one on craigslist right now I have my eye on.
1988 f250 single cab, 2wd, gas engine, standard, surprisingly good exterior condition, 199,000 miles (320,000km) He claims it runs good.
$600.....
Late 80s fords are worthless here..... LOL
There is an 89 f150 with rebuild 300 I6 (80,000 km) and brand new transmission (under 1000 km) and he has had to drop his price all the way down to $850...
It seems everyone here either wants a 1970s truck, or a late 90s-now truck...
Robin, thanks for the landy info.
I think I will go with an old ford f250 (late 80s) to start with, and look for a landy later.
There is one on craigslist right now I have my eye on.
1988 f250 single cab, 2wd, gas engine, standard, surprisingly good exterior condition, 199,000 miles (320,000km) He claims it runs good.
$600.....
Late 80s fords are worthless here..... LOL
There is an 89 f150 with rebuild 300 I6 (80,000 km) and brand new transmission (under 1000 km) and he has had to drop his price all the way down to $850...
It seems everyone here either wants a 1970s truck, or a late 90s-now truck...
Everybody zlackin' today.......
roncoinc
Official Stihl Disser
this is a pretty low hour saw so i'm thinking hopefully not wore out yet
wonder if i could put on the plastic spacer ?? with correct gasket...
or rebuild a plastic spacer carb and put it on...that would work.
tnx for looking.
Plastic spacer will work, whole carb will work. I have used metal replacement modules in them after the plastic ones won`t stop fuel/flooding and they work fine. I had a 112 SD that looked like new, not a scratch on it but it would flood constantly. Plastic module got switched out and the saw ran fine after that. Got $450. for that saw and never looked back.
Just googled this heart **** the doc called me about. My BNP is way out of whack ! Should be around 9000 but its running 300,900 ! Not good at all , got to go see a cardiologist sometime now ? Doc is setting up the appt.
Shouldn't have looked it up ! Now I am worried ! LOL
Told if I get to feeling strange,get to the ER ! Sounds like this pmonia got into my heart too ?
Have a nurse coming out today,wait and see what they say ?
Seems I am not home free yet. Just hope they can fix me back up ? No dang wonder I am so tired all the time !
Shouldn't have looked it up ! Now I am worried ! LOL
Told if I get to feeling strange,get to the ER ! Sounds like this pmonia got into my heart too ?
Have a nurse coming out today,wait and see what they say ?
Seems I am not home free yet. Just hope they can fix me back up ? No dang wonder I am so tired all the time !
sefh3
Addicted to ArboristSite
Damn that's not good.
sefh3
Addicted to ArboristSite
I know of a great hospital that can assist you. Just happen to work for them too.
You guys is getting smarter ! Don't end up like me !!
To bad yer so far away ! LOL
