Sure is quiet in here....do I need to start a fight?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Never had any AM Husky coils before ? I don't have any extras either. I would just check all the connections first. Check the little brass piece behind the coil too,seen them break before.

Brass grounding strap checked. Got familiar with that when I had it all torn down. Connections all tight. Stop switch engaged shorts the circuit.

Spark tested it and spark is very intermittent. First pull tries to start with choke in and nothing after.

I can get a new coil but just want to make sure its not something I can repair like the boot or wire.


Rick
 
Never had any AM Husky coils before ? I don't have any extras either. I would just check all the connections first. Check the little brass piece behind the coil too,seen them break before.

Brass grounding strap checked. Got familiar with that when I had it all torn down. Connections all tight. Stop switch engaged shorts the circuit.

Spark tested it and spark is very intermittent. First pull tries to start with choke in and nothing after.

I can get a new coil but just want to make sure its not something I can repair like the boot or wire.


Rick
 
Sticking to just one, although the whole team from what Ive met seems to think I am a good guy? Plus, I know they can beat my butt in a pillow fight, aint trying to make them mad. hah. Definitely been quite a change from a homebody that didnt need nobody but his family and dogs..

But she loves shooting guns, so I am set! haha
 
Brass grounding strap checked. Got familiar with that when I had it all torn down. Connections all tight. Stop switch engaged shorts the circuit.

Spark tested it and spark is very intermittent. First pull tries to start with choke in and nothing after.

I can get a new coil but just want to make sure its not something I can repair like the boot or wire.


Rick
Thinking bad coil ? You can try the coil off yer 365 on it. Purdy sure its the same.
 
Brass grounding strap checked. Got familiar with that when I had it all torn down. Connections all tight. Stop switch engaged shorts the circuit.

Spark tested it and spark is very intermittent. First pull tries to start with choke in and nothing after.

I can get a new coil but just want to make sure its not something I can repair like the boot or wire.


Rick
Thinking bad coil ? You can try the coil off yer 365 on it. Purdy sure its the same.
Sticking to just one, although the whole team from what Ive met seems to think I am a good guy? Plus, I know they can beat my butt in a pillow fight, aint trying to make them mad. hah. Definitely been quite a change from a homebody that didnt need nobody but his family and dogs..

But she loves shooting guns, so I am set! haha
Yer in deep doodo ! LOL
 
Brass grounding strap checked. Got familiar with that when I had it all torn down. Connections all tight. Stop switch engaged shorts the circuit.

Spark tested it and spark is very intermittent. First pull tries to start with choke in and nothing after.

I can get a new coil but just want to make sure its not something I can repair like the boot or wire.


Rick

The test/check for your switch is actually that it don`t short the coil in the off position....just sayin.
 
The test/check for your switch is actually that it don`t short the coil in the off position....just sayin.

? When the stop switch is engaged meaning pushed down to stop the saw, blue wire, black wire, all have continuity with the cylinder etc. When stop switch is off meaning in he saw run position resistance reading is 210. I think it's supposed to be impedance but I honestly don't remember how to check the impedance of a coil to see what it's supposed to be or where I would get the value for that. I will look coil troubleshooting up in the Husky Service manual.

Like John said I will see if my 365 coil is a fit. gives me a known good one to test with.
 
Thinking bad coil ? You can try the coil off yer 365 on it. Purdy sure its the same.
Good point. I'll cross reference the numbers on the coils to see if it's a fit. I almost feel like it's a broken wire in the spark plug cable but I don't know if this one can be replaced.
 

Latest posts

Back
Top