ArboristSite.com Sponsors
 
 



 

 


Results 1 to 8 of 8
Like Tree3Likes
  • 1 Post By sgreanbeans
  • 1 Post By ddhlakebound
  • 1 Post By Urban Forester

Thread: How close can the driveway be to Oak tree?

  1. #1
    Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    taddat's Avatar
    Join Date
    Sep 2008
    Location
    Minnesota
    Posts
    74
    Credits
    37

    How close can the driveway be to Oak tree?

    I'm clearing a lot to build a house. The lot is mostly Maples with a few Red Oaks and the soil is brown clay.

    The Oak I'm concerned about is 26" dbh and stands about 90 ft. I know more is better but how far should the driveway be from the bottom of the tree?

    Also - the same tree has a vertical scar about chest high that is 3 ft long. Is this something to worry about?

    I have tired to include a few pics - hopefully they work and help. I have more pics if needed -

    Thanks for any advice!!!


    Oak01 (Copy).jpgIMG_0730 (Copy).JPG


    024, 028, 031, 034 x 2, 036 x 2, 038 Super (project) , M361, MS440, MS460


    John Deere Two cylinder 66sv

  2. #2
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Raintree's Avatar
    Join Date
    Jun 2012
    Location
    Mass
    Posts
    862
    Credits
    824
    I would install your drive where you have your access road now.Compaction damage to the root zone already done. Don't worry about the old wound on the Oak, looks like it has closed up nicely.
    "Sorry Ms. your tree is toast, I have this ominous feeling just standing here looking at it."

    RKBA

  3. #3
    Treeaculterologist
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    sgreanbeans's Avatar
    Join Date
    May 2001
    Location
    iowa
    Posts
    3,267
    Credits
    1,221
    As far away as possible, keep the equipment away from it as well. Damage that is done .......... is done, don't add anymore!
    ddhlakebound likes this.
    ISA Certified Arborist
    WWW.QCTREE.COM

  4. #4
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    derwoodii's Avatar
    Join Date
    Mar 2009
    Location
    Victoria Australia
    Posts
    3,397
    Credits
    2,432
    That scar maybe an old lighting strike seen em do that kind of thing. Best to keep your excavation works clear of the structural root zone typically on a tree like that 3 to 4 metres or your yards.
    "Your enemy is never a villain in his own eyes. Keep this in mind; it may offer a way to make him your friend." Robert Heinlein.

  5. #5
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    ddhlakebound's Avatar
    Join Date
    Apr 2006
    Location
    Southwest Missouri
    Posts
    1,531
    Credits
    158
    Quote Originally Posted by Raintree View Post
    I would install your drive where you have your access road now.Compaction damage to the root zone already done. Don't worry about the old wound on the Oak, looks like it has closed up nicely.
    What's been done now the tree can probably survive......What will be done to pour will be a different story. Likely a dozer will scrape off the top 6" and cut off most of the roots on that side. Then a very heavy gravel truck will lay the bed for the drive, then an even heavier concrete truck will pack it down some more as the drive is poured.

    I see that mature oak in serious decline in 6-8 years if a concrete drive is poured where the dirt drive is now. Mature oaks simply do not tolerate significant root disturbance.

  6. #6
    Arboristsite MVP
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Urban Forester's Avatar
    Join Date
    Nov 2005
    Location
    Metro Detroit, Michigan
    Posts
    600
    Credits
    129
    Quote Originally Posted by derwoodii View Post
    ...typically on a tree like that 3 to 4 metres or "your yards".
    You know us "colonials", never quite got the hang of the metric system
    derwoodii likes this.
    "Suburbia is where the developer bulldozes out the trees, then names the streets after them". Bill Vaughan

    www.mikestree.com

  7. #7
    Supreme Saw Whoreder
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Guido Salvage's Avatar
    Join Date
    Apr 2010
    Location
    Formerly Richmond, VA now Lexington, KY
    Posts
    6,110
    Credits
    2,178
    In the mid 1990's I bought a tract of wooded land to build a house in. I pushed a road in and cleared the lot, and ended up with more firewood than I could burn in the time I was there. I ended up shifting the location of the house in order to save a white oak tree. It too was near the driveway, but at the terminus near the house. Between running the dozer and tractor over it, the trucks coming and going, etc., I had to take it down within 2 years. Ended up milling the trunk (still have some of the lumber) and burned the rest in the stove.

    Compaction and root disturbance are your enemy.
    Improving spelling and grammar one AS member at a time.

    "Great minds discuss ideas; average minds discuss events; small minds discuss people." Eleanor Roosevelt

    PROUD FOUNDER - THE BAR AND CHAIN GANG

    Chick cars are for chicks! I am no mechanic, but I changed a spark plug once.
    For every mile of road, there are 2 miles of ditch. Don't get ricked, buy a cord

    The official A.S. badger...

  8. #8
    Member
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation Reputation
    taddat's Avatar
    Join Date
    Sep 2008
    Location
    Minnesota
    Posts
    74
    Credits
    37
    Thanks everyone for the advice.

    So far the heavies thing anywhere near the tree has been a mid-size skid loader. My plan is to use gravel (limestone) and curve the driveway as much around the oak as I can. It's hard to tell from looking at a flat photo but I have some wiggle room in staying away from the tree. I just hope I can stay far enough away. Thanks again for the help on this.


    024, 028, 031, 034 x 2, 036 x 2, 038 Super (project) , M361, MS440, MS460


    John Deere Two cylinder 66sv

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 0.16324 seconds with 44 queries [Server Loads: 1.64 1.52 : 1.59]