Menu
Forums
New posts
Search forums
Terms and Rules
What's new
New posts
New media
New media comments
Latest activity
Media
New media
New comments
Search media
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Terms and Rules
Menu
Log in
Register
Install the app
Install
Forums
Tree Care Forums
Firewood, Heating and Wood Burning Equipment
Help With Firewood Processor Choice
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Arborist Forum:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="rancher2" data-source="post: 6736765" data-attributes="member: 32289"><p>Woodcutteranon</p><p>Thanks for the write up on the Dyna. A couple of years ago I looked at theirs but it came down to I didn't have enough pole type wood size wise that would work in a smaller processor. I built a homemade one that I am still working all the bugs out of it works ok, a lot of the wood I run is 24 inch dia to 36 inch dia. I built it with a 6 way hyd adj wedge. I couldn't image not having a hyd adjust wedge I am moving mind all the time. I do the same and run the multi wedge up or only four way and just resplit with another splitter if I have the help before it goes up the conveyor into the trailer . I am only doing my own wood so it the size gets a little off it's ok. I wish also I would have built this one with a hard stop also for the length. A chain with a hook doesn't work the best. I may install a hard stop on mine yet.</p></blockquote><p></p>
[QUOTE="rancher2, post: 6736765, member: 32289"] Woodcutteranon Thanks for the write up on the Dyna. A couple of years ago I looked at theirs but it came down to I didn't have enough pole type wood size wise that would work in a smaller processor. I built a homemade one that I am still working all the bugs out of it works ok, a lot of the wood I run is 24 inch dia to 36 inch dia. I built it with a 6 way hyd adj wedge. I couldn't image not having a hyd adjust wedge I am moving mind all the time. I do the same and run the multi wedge up or only four way and just resplit with another splitter if I have the help before it goes up the conveyor into the trailer . I am only doing my own wood so it the size gets a little off it's ok. I wish also I would have built this one with a hard stop also for the length. A chain with a hook doesn't work the best. I may install a hard stop on mine yet. [/QUOTE]
Insert quotes…
Verification
Post reply
Top