jonsered 930 questions

[cop0110]

Hi, I bought a Jonsered 930 turbo from a friend of mine this spring. I need a kill switch he just gigged a wire out of the hole and you gotta ground it to the saw and it shuts off. It starts and will idle until I ground it off. But the saw dies when I give it gas. Any sugestions would be appreacated. I will try to get some pictures uploaded later tonight.:monkey:

 

[bama]

Sounds like you need to richen the L jet a bit. If you turn the L screw out(CCW) a bit it should help. If this doesn't help, you may need fuel filter, carb rebuild, etc. Depends on how long it has been since this stuff has been done.

Once you open the L jet, your idle will slow down, so you may need to turn in that screw to compensate.