Poulan-micro super XXV deluxe : thread dimension

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Kola

New Member
Joined
Sep 7, 2021
Messages
4
Reaction score
0
Location
Belgium
I'm repairing a Poulan-micro super XXV deluxe.
Looking for the thread of of the crankshaft (530022172 ) to find a clutch (or to rework the one I bougth, it doesn't seems to be a M8)
On the other end (pulcord side) there is a bolt 5/16-24 so it migth be a 5/16 on the clutch side aswell.

I found a clutch drum and clutch but the thread is not the right one. The clutch can only be mounted 1 or 2 rotations and then blocks)

Thanks for any information, Kola
 
I'm repairing a Poulan-micro super XXV deluxe.
Looking for the thread of of the crankshaft (530022172 ) to find a clutch (or to rework the one I bougth, it doesn't seems to be a M8)
On the other end (pulcord side) there is a bolt 5/16-24 so it migth be a 5/16 on the clutch side aswell.

I found a clutch drum and clutch but the thread is not the right one. The clutch can only be mounted 1 or 2 rotations and then blocks)

Thanks for any information, Kola
The Poulan-micro was made in the USA so all the threads are SAE.
 
Thx, indeed. Maenwhile I found that 5/16-24 is UNF. As you say, it's made in the USA, so no metric..
 

Latest posts

Back
Top