Hi,
Don't know where I should ask this but figure if you guys can help me out here.
I have a 2 family house that I rent out the upper floor and they don't seem to care that they are wasting engery. They don't care that it costs them $$$ indirectly.
Have rasied the rent and it doesn't appear to help keeping the margin enough. (cost of home heating oil have gone up)
I had a new indirect fired 80 gal hot water heater installed recently due to the original one that leaked and also had a new boiler installed with better efficency to replace the old one that was at end of it's life.
I would like to know how to control or set the max room temp the boiler can provide...there are 3 heating zones in this house (basement, first floor, 2nd floor)
Like if I want to set the boiler to provide a max room temp of 72 degrees and no more.
And if someone in their floors sets the temp to say...76 degrees, the boiler will only provide up to 72 degrees and no more.
But still allow their theromstat to control the room temp from it's lowest setting to the max room temp the boiler will only provide.
How do I do this and what do I need?
Don't know where I should ask this but figure if you guys can help me out here.
I have a 2 family house that I rent out the upper floor and they don't seem to care that they are wasting engery. They don't care that it costs them $$$ indirectly.
Have rasied the rent and it doesn't appear to help keeping the margin enough. (cost of home heating oil have gone up)
I had a new indirect fired 80 gal hot water heater installed recently due to the original one that leaked and also had a new boiler installed with better efficency to replace the old one that was at end of it's life.
I would like to know how to control or set the max room temp the boiler can provide...there are 3 heating zones in this house (basement, first floor, 2nd floor)
Like if I want to set the boiler to provide a max room temp of 72 degrees and no more.
And if someone in their floors sets the temp to say...76 degrees, the boiler will only provide up to 72 degrees and no more.
But still allow their theromstat to control the room temp from it's lowest setting to the max room temp the boiler will only provide.
How do I do this and what do I need?
Last edited: