Stihl 021 wrist pin bearing

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wap

New Member
Joined
Oct 8, 2008
Messages
3
Reaction score
0
Location
Mass
Bought a new Stihl piston and cylinder from Baileys for an 021 and parked it on the shelf for a while. Went to start putting the saw back together today and to my surprise I can't get the wrist pin bearing in the bottom of the piston. My measurements say the bearing is almost .004 too wide. Looks like there is plenty of meat on the ends of the bearing that could be removed before hitting the roller pins. Any issues with taking some off?

Thanks
 
Back
Top