I finally was able to get my WoodMaster 4400 installed this past Friday. The reason for such a delay is that I had to hire an HVAC guy to unhook my furnace lift it up and then put the exchanger in underneath it, and re-run all the lines and the propane line for the furnace.
The 4400 lit.
http://**************************/mb_pics/front.jpg
The pump.
http://**************************/mb_pics/Back.jpg
Here is the exhanger under the furnace.
http://**************************/mb_pics/Furnace.jpg
Hot Water Exchanger.
http://**************************/mb_pics/HotWater1.jpg
http://**************************/mb_pics/HotWater2.jpg
The 4400 lit.
http://**************************/mb_pics/front.jpg
The pump.
http://**************************/mb_pics/Back.jpg
Here is the exhanger under the furnace.
http://**************************/mb_pics/Furnace.jpg
Hot Water Exchanger.
http://**************************/mb_pics/HotWater1.jpg
http://**************************/mb_pics/HotWater2.jpg