CNYCountry
ArboristSite Operative
Bought 6/1/2021, needed a bigger saw than I had to clear some land. Selling because my new MS661 finally came in. Warranty good until 6/1/2023. All receipts, documents, accessories, bar and 4 full chisel chains included.
I've only run 4 or 5 tanks through it, always used VP SEF 50:1 (https://vpracingfuels.com/product/501-premixed-small-engine-fuel/) since it came dry from the dealer. Only used to fell and buck stuff that my 60cc saw wasn't really big enough for.
Bar is .058" gauge, 28", set up for 3/8" pitch, 93 drivers. 4 chains include one new Stihl RS that's never been out of the box, the used Husky chain that came with it and two used Stihl RS chains. The Husky and one Stihl chain are probably 80%+ life left, the other is maybe 50% as I hit trash in a tree and had to grind past the damage.
All 3 used chains were just done on my grinder with a high quality CBN wheel, so all angles are correct, all cutters equal and not burned. Rakers set to .025 by gauge.
I have a total of $1,116.52 into this with tax between the original receipt and the 3 Stihl RS chains (receipt shows 2 of them, missing receipt for the third but same price). You are welcome to inspect and try it, I think the condition of bar/sprocket, receipts and so on tell the story, this saw is barely used. Welcome to test compression, pull muffler, etc.
Strongly prefer local, in person cash sale. I'm in central NY state, north of Utica.
Feel free to tell me I'm nuts. I would like to see $800, I think realistically the bar and 4 chains included along with receipts, warranty etc make it a decent value at that price.
Here it is in 32" sugar maple, was warmed up before video:
I've only run 4 or 5 tanks through it, always used VP SEF 50:1 (https://vpracingfuels.com/product/501-premixed-small-engine-fuel/) since it came dry from the dealer. Only used to fell and buck stuff that my 60cc saw wasn't really big enough for.
Bar is .058" gauge, 28", set up for 3/8" pitch, 93 drivers. 4 chains include one new Stihl RS that's never been out of the box, the used Husky chain that came with it and two used Stihl RS chains. The Husky and one Stihl chain are probably 80%+ life left, the other is maybe 50% as I hit trash in a tree and had to grind past the damage.
All 3 used chains were just done on my grinder with a high quality CBN wheel, so all angles are correct, all cutters equal and not burned. Rakers set to .025 by gauge.
I have a total of $1,116.52 into this with tax between the original receipt and the 3 Stihl RS chains (receipt shows 2 of them, missing receipt for the third but same price). You are welcome to inspect and try it, I think the condition of bar/sprocket, receipts and so on tell the story, this saw is barely used. Welcome to test compression, pull muffler, etc.
Strongly prefer local, in person cash sale. I'm in central NY state, north of Utica.
Feel free to tell me I'm nuts. I would like to see $800, I think realistically the bar and 4 chains included along with receipts, warranty etc make it a decent value at that price.
Here it is in 32" sugar maple, was warmed up before video:
Attachments
-
01 IMG_0550.JPG2 MB · Views: 31
-
03 IMG_0558.JPG1.4 MB · Views: 40
-
04 Saw Receipt.png4.5 MB · Views: 39
-
05 Chain Receipt.png761 KB · Views: 35
-
09 IMG_0554.JPG2 MB · Views: 32
-
11 IMG_0557.JPG1.1 MB · Views: 33
-
12 IMG_0559.JPG1.3 MB · Views: 34
-
13 IMG_0560.JPG711.3 KB · Views: 31
-
15 IMG_0562.JPG798.9 KB · Views: 23
-
16 IMG_0563.JPG727.4 KB · Views: 30