Poulan 3750 Parts (Found)

[Mastermind]

I need a good clutch cover for this saw.


I could also use a good top end. And a top end for a 330 Pro.

One of these is a keeper, and the other will be gifted to my neighbor.

 

[Toad22t]

I may have something. Let me check when I get home.

 

[Mastermind]

I have a new hero.

 

[Duane(Pa)]

You should defeat the limiters and do a muffler mod.

 

[Vibes]

I have one in gray. May be one in green, but the green ones going to sort of be snowed in for a bit.

 

[Vibes]

Also have a very clean 3.3 Craftsmans best that I have lost interest in. I bought a new OEM piston for it The OEM cylinder is still available .The jug may clean up or I would've bought the jug when I bought the piston. I would entertain offers on it.

 

[RedneckChainsawRepair]

Randy that stuff is so cheap new at Email or PM elsewhere as folks get bent out of shape here if link posted.

 

[RedneckChainsawRepair]

3.3 crafts cylinder wont fit a 330 3450 just so you dont try that. Watch what you do here. Some 3.3 are bare bore too. 330 3450 is chrome bore.

 

[Vibes]

3.3 crafts cylinder wont fit a 3450 just so you dont try that. Watch what you do here. Some 3.3 are bare bore too. 330 3450 is chrome bore.

Yea I'm aware of that. Most times if you have piston and cylinder they will swap out together. I'm not familiar with this 3750 though.

 

[Toad22t]

Where does the 335 come in then?

 

[Toad22t]

I have a new hero.

If your talking about me, I would start looking for a different one so your not disappointed. Lol

 

[RedneckChainsawRepair]

Where does the 335 come in then?

Cyl wont bolt on either. Chrome bore and piston is thin rings NLA so you need to use a 330 3450 piston and ring.

 

[Mastermind]

Clutch cover is NLA Kevin.

 

[Toad22t]

Poulan just couldn't make anything easy could they lol.

 

[Vibes]

Poulan just couldn't make anything easy could they lol.

It doesn't get any easier than working on any of these models of Poulans. Unfortunately some of the parts are NLA. But the again these saws are getting old.

 

[Toad22t]

It doesn't get any easier than working on any of these models of Poulans. Unfortunately some of the parts are NLA. But the again these saws are getting old.

Is meaning for part interchangeability. I have a pp365 and I like it , but am trying to get rid of it due toi just don't need it. Good saws though.

 

[joe25DA]

I need a good clutch cover for this saw.

View attachment 405053
I could also use a good top end. And a top end for a 330 Pro.

One of these is a keeper, and the other will be gifted to my neighbor.

Nice. Has the HD 3 shoe clutch too.

 

[Mastermind]

Well I've got all the parts I need. Thanks Andy !!!

I might still need parts for this 330.......but I'll mark this thread as done.

Thanks for the offer on the cover Joe.

You guys are awesome.

 

[joe25DA]

No problem. As you know these are fun saws

 

[Mastermind]

I've been wanting a 3750 for a while. I've had several 330Pros but end up selling them every time. This 3750 ain't going anywhere.