Like title states. This is a 630 dual coil with a 670 top end on it. Has a BGD, MM, and TA. Looks like the PO did a lil smoothing on the exhaust port but thats it. Stock beside the above mods done by PO. (who is a member here) Runs good, cuts and oils good too. Has a few carbon streaks on the piston. Only other thing I can think of is I epoxied the pin on the brake band in the clutch cover. Is was too loose for my liking.
$275 plus shipping, FnF or I'll add the 3% for GnS.![20240320_140742.jpg 20240320_140742.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851570-d826386d28343f78eff16266fd4a6bb1.jpg)
![20240320_141153.jpg 20240320_141153.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851571-d7905462f98dbe61449e6a35e52ffaeb.jpg)
![20240320_141242.jpg 20240320_141242.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851572-25afbb10da483be9c12d47cac05b909b.jpg)
![20240320_141301.jpg 20240320_141301.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851573-f413a587c1035d5afa33aa518dc40ec1.jpg)
![20240320_141404.jpg 20240320_141404.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851574-129ca6120490b84b038476a672c0bad5.jpg)
$275 plus shipping, FnF or I'll add the 3% for GnS.
![20240320_140742.jpg 20240320_140742.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851570-d826386d28343f78eff16266fd4a6bb1.jpg)
![20240320_141153.jpg 20240320_141153.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851571-d7905462f98dbe61449e6a35e52ffaeb.jpg)
![20240320_141242.jpg 20240320_141242.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851572-25afbb10da483be9c12d47cac05b909b.jpg)
![20240320_141301.jpg 20240320_141301.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851573-f413a587c1035d5afa33aa518dc40ec1.jpg)
![20240320_141404.jpg 20240320_141404.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/851/851574-129ca6120490b84b038476a672c0bad5.jpg)