McCulloch Chain Saws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bruce Hopf

ArboristSite Guru
Joined
Apr 26, 2008
Messages
806
Reaction score
64
Location
North of Sebringville, Ontario, Canada
I know heimannm has a lot of McCulloch Chain Saws, as well as myself, I was wondering if anybody else has a few McCullochs in their collection of Chain Saws, and are they for work, or for display. Thanks for your input. Bruce.
 
In order of motor size I have a mac125 (123cc), model 73 (120cc gear drive), pm1000 (100cc), super44A (87cc), 1-53 (80cc), 250 (80cc), G-70 (72cc), pm610 (60cc) and an early 10-10A (50+cc). All of them get used in rotation then cleaned and displayed until the next go-round. The 73 is a beast with a long bar once you dig the spikes in and push. The 125 is a legend and deserves it. The pm 1000 cuts about like a 660 with a 32" bar on it (maybe a little more guts). the super 44A is heavy but suprisingly quick. The 1-53 and 250 cut about the same and share a bar. The 10-10 is one of the strongest saws in this size segment that I have ever used. Oh yeah..... I almost forgot about the little mini mac 6 top handle.
 
Last edited:
I collect Mcculloch chainsaws of all sizes and shapes until the J.F. generation. No pictures just a lot of saws. Mini-Macs - 125s, any of them. Do not find many around here but when I do I usually try and buy them. Most of my smaller Stihls, Pioneers and Homelites will go away soon to make more room for Mccullochs.

Had a good run of luck finding 1-10 and 10-10 series saws early this year and then no more Macs to be found again. It gives me something to look for.
 
I just have my one pro mac 610. I still need to go through the carb and replace the fuel line. It looks good just sittin' there right now !
 
I also have a few Macs (collection only, but nearly all are runners):

SP125/24"
PRO MAC 105/20"
SP105/18"
SP105/20"
10-10A
PRO MAC 55
SP40
15
35
200
1-53
250
POWER MAC 6

I also sold recently a PM800 and a PM610

Would love to find a mac 2 man saw :greenchainsaw:
 
I have a 1-86 Mac that is a beast. I have run it a few times. With the 3 to 1 reduction the chain speed is very slow. It seems to be for occasional use. It weighs 32 pounds plus the bar and chain. It sure sounds healthy when it fires up. I have a healthy respect for the guys that ran saws of this size for a living.
 
Here is what I have
6 SP125
two with 2' bars, and 3 with 3' bars and one with a 30" bar
795 4'bar
890 2'bar
2 old 33s
Promac 800
250
3-10
790
640
1-62
Mini Mac 6
 
I have three and like them very much. One is a Eager Beaver 3.7 was my most used saw until I got my 2159 I think it is the same as a 610? Nothing against the saw I just want to take it easy on the old girl now it's done a great job over the years. The other is a little cheap Eager Beaver I bought brand new in 89/90 32cc Never has given me any trouble and has cut so much wood it is scary it's still going. Best for last I have a sp105 I bought off a older gent up the road from me. All I can say is this thing is a beast and will always starts in three pulls unless I have the switch in the off position! I have retired my big one since I have bought the 7900, I just don't want to mark it up. But I still take her out to cut the odd large poplar I come across. A long story to my 105 as the owner always liked me as a little kid He suffered from CAD in a big way. Then one day he said would you like to buy it? By that time I was in my 30s and of course I bought it for $200.00 His words were I want to give it a good home (kinda like a puppy)
P.S It sleeps in the basement on a coffee table now, But still ready to go at a moments notice.
 
Thanks for bringing this up...

Thanks Bruce for getting this started.

In my signature line I list only my runners. I do use a few of them from time to time, like the SP125C's for some big stuff, I really like the sound of the 1-85 so I use it when I get a chance as well. Most of the rest are just to fire up and listen to while I make a few cuts sometime during the year. I hope to make the 740 into a work saw as well but in all honesty, with the Stihl's and the Jonsered's running well I don't really want to use the big McCullochs all that much.

My goal is to get one of every 1 man saw from 1948 -1970 or so. At the present time I have the complete 1-40 series, with a recent e-Bay purchase I now have the complete 1-50 series, and a good start on the 1-60 series, a long way to go with the 1-70 and 1-80 series saws. Somehow I missed on a 550 this week but have another chance coming up there. I need a 250 Super to fill out the bottom end of the 3 number saw (200, 250, 300, etc.) and a lot of empty spaces from 550 on up.

As I showed in an earlier thread, I have built some additional shelves to display my saws and have at this point about 40' of empty space available at present.

If anyone out there has something they want to move along please do let me know. I might even be willing to trade one of the extra's that I have for something that will fill in a blank.

Mark

attachment.php


attachment.php


attachment.php


attachment.php
 
Thanks Bruce for getting this started.

In my signature line I list only my runners. I do use a few of them from time to time, like the SP125C's for some big stuff, I really like the sound of the 1-85 so I use it when I get a chance as well. Most of the rest are just to fire up and listen to while I make a few cuts sometime during the year. I hope to make the 740 into a work saw as well but in all honesty, with the Stills and the Jonsereds running well I don't really want to use the big McCullochs all that much.

My goal is to get one of every 1 man saw from 1948 -1970 or so. At the present time I have the complete 1-40 series, with a recent e-Bay purchase I now have the complete 1-50 series, and a good start on the 1-60 series, a long way to go with the 1-70 and 1-80 series saws. Somehow I missed on a 550 this week but have another chance coming up there. I need a 250 Super to fill out the bottom end of the 3 number saw (200, 250, 300, etc.) and a lot of empty spaces from 550 on up.

As I showed in an earlier thread, I have built some additional shelves to display my saws and have at this point about 40' of empty space available at present.

If anyone out there has something they want to move along please do let me know. I might even be willing to trade one of the extras that I have for something that will fill in a blank.

Mark

attachment.php


attachment.php


attachment.php


attachment.php

Mark, Glad to help. I've seen other threads, of other Brands of Chain Saws, but no threads for Mcculloch. So I thought it was time to start. I was wondering who else had a collection of McCullochs, other than you and myself. I was surprised to see so many posts. Thanks to all that have, and will be answering to this thread. Bruce.
 

Latest posts

Back
Top