Swap meet...

[Big_Wood]

hay guys. looking for a couple parts

346xp OE

cylinder bolts (some weird thread pitch apparently)
filter mount (for the clip on filter)
op presence lever and spring


I know it's a long shot cause most people that have them want to keep them but looking for an 01 3120 flywheel with black coil also, just the flywheel would do though

I have some stuff to trade

Bump i got the 346 parts but still looking for 01 3120 flywheel. I am also finding myself in need of a nice cylinder cover without purge bulb hole for an OE 346 thanks for any help

 

[cat-face timber]

Husky 288 Parts NEEDED

I am in need of

Husky 288

Cylinder/piston and Carb.

Or a Parts saw..

Thanks..

Not much Green Paper, some MAC (6xx series) and some Husky (136/137 and 340) Parts/parts saws for trade.

 

[Arrowhead]

I was given a pile of Homelite weed whips if anybody needs parts.

 

[likesaws]

Efco 156

I need fuel tank for Efco 156. Is there any out there parts saw?

 

[bplust]

I need fuel tank for Efco 156. Is there any out there parts saw?

If you haven't already, you should check with Chainsawr (Chainsawr.com if you're not familiar). They're a site sponsor and have an EXCELLENT Efco stock.

 

[Jspaeth16]

Looking for a jonsered 525 recoil spring and a Poulan 3300 av mount or parts saw.

I have some parts to trade but mostly just money

 

[Modifiedmark]

I was given a pile of Homelite weed whips if anybody needs parts.

As matter of fact I need a coil for one. I'll look and see what one crosses to this John Deere version.

 

[Arrowhead]

As matter of fact I need a coil for one. I'll look and see what one crosses to this John Deere version.

Sounds good.

 

[Jacob J.]

JJ
Any luck on finding out if you had a pulley? I may end up turning one out on the lathe or swaping flywheel and pulley off a 3750.
Thanks
Bob

It's looking like I don't have this. I went through all my NOS pulleys and I don't have anything remotely resembling the pulley for a 365.

 

[SawGarage]

Looking for:

028 Carb (has a small Tilly on it now...)


STILL LOOKING: 435-440 Husqvarna carb...

51-55 choke lever...


To Trade: Stuff and more stuff...

Thanks guys!!


J

 

[Brushwacker]

Looking for:

028 Carb (has a small Tilly on it now...)


STILL LOOKING: 435-440 Husqvarna carb...

51-55 choke lever...


To Trade: Stuff and more stuff...

Thanks guys!!

I
J

I think I have a new 55 choke lever and a used 028 carb, will check for details.
Is your tilly carb garb or are you looking for a walbro ?
I have a neighbor wants me to find him a clutch cover assy with the brake and chain adjuster for a Husqvarna 435.

 

[atpchas]

Looking to swap some Husky 268 parts and most of an Echo 280E. Prefer Stihl parts (bars, chains, 026, 046 parts) rather than cash.

 

[shawn022]

Any chance of finding a good coil and flywheel for an 056?? Either Bosch electronic or SEM. Or if I read correctly just a Sem 056 flywheel would open up a few more possibilities.

Also looking for a good carb for an 036.

 

[Wagnerwerks]

Any chance of finding a good coil and flywheel for an 056?? Either Bosch electronic or SEM. Or if I read correctly just a Sem 056 flywheel would open up a few more possibilities.

Also looking for a good carb for an 036.

I have some random ignition parts for older stihls. Any part numbers or pics?

 

[blackoak]

Looking for:

028 Carb (has a small Tilly on it now...)


STILL LOOKING: 435-440 Husqvarna carb...

51-55 choke lever...


To Trade: Stuff and more stuff...

Thanks guys!!


J

Clean out your inbox. Did you get the 044 cover and cash I sent you?????

 

[huskydude]

husky 262 tank piece

I need the piece on the early 262 tanks that screws into side/bottom. PN 503 50 17-02
I know this may be difficult to find, maybe someone here can help me out. Have a super clean 262 i'm fixing.
Lots to trade.

 

[PainAndMurphy]

Efco / Oleo Mac 962 falling spikes ?

anyone??..



the only place who sells ONE (1!!) wants 25$ for shipping of this tiny part..

:bang:

 

[nmurph]

I need the piece on the early 262 tanks that screws into side/bottom. PN 503 50 17-02
I know this may be difficult to find, maybe someone here can help me out. Have a super clean 262 i'm fixing.
Lots to trade.

Those are hard to come by. I have been promised one of those on several occassions and have yet to see one hit my door. It is easier to just replace the tank with one that does not have that compartment.

 

[PogoInTheWoods]

I have some random ignition parts for older stihls. Any part numbers or pics?

SEM flywheel is 1115-400-1208 w/ignition module listed as 1108-400-0800 and Bosch fanwheel is 1115-086-0501 w/flywheel insert listed as 1115-400-1206.

If ya have two of those ignition modules, let me know...pretty please? I sure could use one too!

 

[Brushwacker]

Looking for:

028 Carb (has a small Tilly on it now...)


STILL LOOKING: 435-440 Husqvarna carb...

51-55 choke lever...


To Trade: Stuff and more stuff...

Thanks guys!!


J

Surprisingly I struck out finding the 028 carb but i do have the new choke lever: P/N 503 60 84-01
Send me a PM if you need it.