It was my favorite part!! I ate it the whole next week!!!!
Sent from my iPhone using Tapatalk
Wky gtg 2013
- Thread starter Mrs. J
- Start date
Help Support Arborist Forum:
Sent from my iPhone using Tapatalk
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Yay thank you!
Guido Salvage
Supreme Saw Whoreder
Works for me and my wife has put it on the calendar.
Will have to see what is on my plate and check with the Mrs. I hope to make it.
How bout you give me a list of things I can buy here for the gumbo. Then you won't have to bring so much. That is if you want to make it again this year?
I will shoot you a PM a little closer to the date. I'm thinking of bringing my motor home this year so I don't have to do any leaving. If everything is dry it should be ok.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Yes we plan on a motorhome too. Have you got room for a 40 footer?
Hedgerow
HACK
Right smooth in the middle of the front lawn!!!!!
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Maybe it won't be so wet......
srcarr52
We can't stop here, this is bat country.
Maybe Doug will stop where he was told to.
Hedgerow
HACK
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Lol!
The RV does take up lots of space. I think the RV was on the only solid spot in the front yard at Hedgefest (2013)
D
Deleted member 83629
Guest
i would go but a 3 hr drive is to far for my gas drinking truck.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Were only 8 hrs away!
D
Deleted member 83629
Guest
to haul my toys to the show plus my fuel on my c30 at 10 mpg it would cost a fortune, can't drive the 1500 its a shortbed stepside and it has trouble hauling grocerys.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
We figured @7.5 mpg the 6 of us would pay around 100.00 round trip!
I thought it was 7.
D
Deleted member 83629
Guest
1 of me 10 mpg truck needs premium 4.12 per gallon. then room and board sounds expensive for a guy scraping by on 800 per month.
Homelite410
Hack with a CNC Mill
- Joined
- Mar 9, 2010
- Messages
- 5,210
- Reaction score
- 9,096
Sorry to hear that man! Yes Steve your included.
