Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[Locust Cutter]

Dad and I got out to my buddies ranch today. I haven't stacked it yet as I ran out of gas, but we have between 3/4 and 7/8 or a cord of Hedge bucked and split. There was a lot of canopy in it so there was a lot of little saw work. On a related note, Dad has decided that he wants to buy a Snellerized MS201 as a light limbing saw. I'm still fond on the T540xp or Echo CS355T. Tomorrow I need t stack the wood and then have some large Red Oak rounds to noodle, split and stack.

Any further words on Mo Jim?

Matt,
Sometime I'm going to have to meet up with you and have you check the timing on my 9010. I adjusted the mixture a bit today and she's MEAN in Hedge... She was popping a bit though almost like she was still fat, but a bit different. I have different bribing material in the form of beer, bourbon and possibly some misc parts...

 

[Hinerman]

Good morning everybody. Everybody ok, been 12 hrs since the last post?

 

[Hinerman]

I need an 084...
A nice one...
Collection is missing a couple...

How nice?

 

[jerrycmorrow]

good day to ya all

 

[sawnami]

Tammi got me a new set of wheels for my grinder for Christmas so I tried one out on a 1/2" chain.
Woke up the neighbors this morning to check it out[emoji39] For an old saw, it made it's way through a log fairly quick with that 1/2" chain.

Sent from my SM-N910V

 

[Hedgerow]

Those can be fun to tune...
Takes some run time at full heat..
As they will start out a bit rich, but move into proper tune as they reach operating temp..

 

[Hedgerow]

How nice?

Just decent..
Good mechanically, with nothing broken/missing..

 

[jerrycmorrow]

had a productive weekend, saw wise. got the leaky handle/chain oil tank/carb box swapped on my xl-101-2-3 frankinsaw; put the finishing touches on the xl-123; installed the new coil on the EZA. now all I got to do is tune em. the EZA been waiting for 2+ years for its turn. now gotta do the SEZA and the poulan 4000. just sayin

 

[67L36Driver]

Morning midlanders!

Just got off the phone with Jim. He is doing fine except the trouble with his back.

 

[Work Saw Collector]

Morning midlanders!

Just got off the phone with Jim. He is doing fine except the trouble with his back.

Thanks.

 

[WKEND LUMBERJAK]

Morning midlanders!

Just got off the phone with Jim. He is doing fine except the trouble with his back.

How is his wood supply he keeps giving me the runaround when I ask. Hard headed geezer.

 

[67L36Driver]

Jim is out most every day collecting wood when he can. Mentioned going out by Stewertsvile today.

 

[workshop]

Maybe a charity cut for Jim. Just don't tell him it's a charity cut. More like a test and tune session.

 

[67L36Driver]

Maybe a charity cut for Jim. Just don't tell him it's a charity cut. More like a test and tune session.

Maybe now that his internet connection is down we could slide it past him.

I got no truck nor any wood. Darn townie.

What wood I have is cut in small cubes testing little saws.

 

[jetmd]

Test and tune would be fun. We have several members that are relatively close to Jim.

 

[Ken12]

Since im a newbie, im gonna ask where Jim lives. Is it in Mo.?

 

[WKEND LUMBERJAK]

Maybe now that his internet connection is down we could slide it past him.

I got no truck nor any wood. Darn townie.

What wood I have is cut in small cubes testing little saws.

Test and tune would be fun. We have several members that are relatively close to Jim.

Chet is right. Carl do you think you might be able to come up with a place close to Jim?

 

[67L36Driver]

Since im a newbie, im gonna ask where Jim lives. Is it in Mo.?

Halls, Mo.. Wide spot on hwy 59, 7 miles sout of St. Joseph.

 

[Ken12]

Oh ok. He is quite a way from me.

 

[67L36Driver]

Chet is right. Carl do you think you might be able to come up with a place close to Jim?

Been turnin that over in my head. Come up empty. We live in the middle of east end.