Antique saw thread

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Anybody knows something about this saw? is for sale for 200 euro/216 dollar.
The seller does not know anything about it apart from that he got the saw 40 years ago in a barn find and thinks its American.
Screenshot from 2016-01-04 19:40:31.png Screenshot from 2016-01-04 19:40:42.png
 
Your saw is a Danarm, they were made in the UK and many were exported as parts and assembled in the territories of the UK, namely Canada and Australia. It appears the bottom brace for the rear handle is broken or missing, they were a rather weak link on these saws.
It might be a model 171 or a 173, they were very close in the looks dept.
 
Your saw is a Danarm, they were made in the UK and many were exported as parts and assembled in the territories of the UK, namely Canada and Australia. It appears the bottom brace for the rear handle is broken or missing, they were a rather weak link on these saws.
It might be a model 171 or a 173, they were very close in the looks dept.

Thx! Pioneerguy600.
Is it any good?
what would it be worth?
 
I started to dig through this thread looking for a match, but the thread is just too long. So, here's the deal. A guy I work with gave me this saw just to get it out of his workshop. He was preparing to restore it but lost interest. Can anyone out there tell me what model Homelite saw this is? (I also have a box full of parts that he swears will make this a complete saw when assembled) Thanks
IMG_0144.JPG IMG_0145.JPG IMG_0146.JPG IMG_0147.JPG IMG_0148.JPG
 
I started to dig through this thread looking for a match, but the thread is just too long. So, here's the deal. A guy I work with gave me this saw just to get it out of his workshop. He was preparing to restore it but lost interest. Can anyone out there tell me what model Homelite saw this is? (I also have a box full of parts that he swears will make this a complete saw when assembled) Thanks
View attachment 477022 View attachment 477023 View attachment 477024 View attachment 477025 View attachment 477026


From the little there is assembled in your pict I would say its a model 5-20.
 
IMG_0316(1).JPG IMG_0317(1).JPG

This is the Wright/Poulan blade saw that I'm currently working on. Replaced the fuel lines but I have to take the carburetor apart now. It will fire if I pour gas in it but won't draw it in from the tank. Very loud, interesting saw. From what I read on here it was favored by meat cutters and timber framers. I'd like to hear it roar again.

I pulled it from the metal trash at my local transfer station. Anyone know where to find the model # on it, or what model it is?
 
View attachment 477695 View attachment 477696

This is the Wright/Poulan blade saw that I'm currently working on. Replaced the fuel lines but I have to take the carburetor apart now. It will fire if I pour gas in it but won't draw it in from the tank. Very loud, interesting saw. From what I read on here it was favored by meat cutters and timber framers. I'd like to hear it roar again.

I pulled it from the metal trash at my local transfer station. Anyone know where to find the model # on it, or what model it is?

Model number on those are on a metal tag on the bottom side of the starter housing.
 
Thanks for the heads up on the tag. I didn't look very close haha. Tag says it's actually not a 306A but a model 100, serial 174151.



IMG_0318.JPG


Still got a lot of paint on the bottom, too.

IMG_0319.JPG
 
Thanks for the heads up on the tag. I didn't look very close haha. Tag says it's actually not a 306A but a model 100, serial 174151.



View attachment 477710


Still got a lot of paint on the bottom, too.

View attachment 477711

It's the same as the Poulan 306A though, built by Poulan for Wright. See on bottom of the tag where it says Beaird Poulan.
 
You have a 306A based reciprocating saw. Very rare and great shape

Sent from my LG-D800 using Tapatalk
It's the same as the Poulan 306A though, built by Poulan for Wright. See on bottom of the tag where it says Beaird Poulan.

Sorry, I missed the part where you said 306A "based" reciprocating saw. Interesting that it was based on the 306 chassis. I read some history of the Poulan/Wright line and it is a little murky. Very cool saws though and they must have been exciting for their time. I need to get some smaller wrenches this week so I can pull the carb. One of the mount screws is in a really tight place. Carb screws in through the back. It's a tillotson carb, hopefully easier to find gaskets for than the Carter carb on other Wright saws which I've heard is very difficult to track down kits for.

Screen Shot 2016-01-10 at 9.32.21 PM.jpg $_57.JPG
 
Back
Top