Poulan S6000 Guide bar

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mel4638

ArboristSite Lurker
Joined
Jan 4, 2017
Messages
6
Reaction score
0
Location
Cranbrook British Columbia Canada
Hi , I have a Poulan S6000 which I think is a branded Dolmar 152 . I use it on a woodbug sawmill . I am looking for a chainsaw bar that is 37 1/8 in length , with a spocket tip , it is 404 pitch and .063 guage . The stud slot is 14 mm . Stamped on the bar is J63X 44067 1694 . I have 2 of these saws that were purchased new in the early 80s and have less than 20 hours on each of them . Both run like new but cannot find any bars to fit that saw in my area . Would apreciate any help in where I might purchase a bar that I mentioned earlier . Thank you .
 
Go back to the menu and drop down till you see the "Chainsaw" forum, they are better at finding older parts. We can help you out with milling questions. A lot of the guys on the chainsaw forum collect the older Poulans and can probably hook you up, Joe.
 
Hi , I have a Poulan S6000 which I think is a branded Dolmar 152 . I use it on a woodbug sawmill . I am looking for a chainsaw bar that is 37 1/8 in length , with a spocket tip , it is 404 pitch and .063 guage . The stud slot is 14 mm . Stamped on the bar is J63X 44067 1694 . I have 2 of these saws that were purchased new in the early 80s and have less than 20 hours on each of them . Both run like new but cannot find any bars to fit that saw in my area . Would apreciate any help in where I might purchase a bar that I mentioned earlier . Thank you .
A any bar for a Stihl 075, 088, 090 ms880 will work with minor oil hole modification. Stihl 3002 series or Cannon S2 I believe.
 
One more question , would anyone know the value of a Poulan S6000 ? I bought 2 of theses saws in the early 80s and one of the saws has from 1 to 8 hours on it . The saw looks and runs like new and I have the manual for it .The other saw I use on my chainsaw mill and will keep . The saw that looks new the only thing wrong is the poulan decal was rubbed from moving it around my garage for 35+ years .
 
Back
Top