2017 Iowa GTG
- Thread starter hoskvarna
- Start date
Help Support Arborist Forum:
Check the pin dia also as I think that got changed when it went to the super.
Write this down, I'm doing it now so I don't forget later.
Crank seals you need to get
FW side Dichtomatic 068091VM
PTO side, SKF 6105 and you need 2. There very small and easy to mangle so I suggest getting a extra one or two. LOL
I have had lot's of practice but still screw one up once in a while. Good thing there cheap.
Crank seals you need to get
FW side Dichtomatic 068091VM
PTO side, SKF 6105 and you need 2. There very small and easy to mangle so I suggest getting a extra one or two. LOL
I have had lot's of practice but still screw one up once in a while. Good thing there cheap.
It's complete, shouldn't take much to get it going again if that is what you want to do. I think someone just put it on the shelf and forgot about it. I forgot to mention it doesn't have a chain brake (don't think that is a big deal). If you want I can include for free the worthless Oregon laminate banana-nose bar that was on it at the auction.
Found a bare piston but its not too great. I'll bring it along anyway.
Someone can update the list, and I talked to Cbfarmall, were both in.
Hoskvarna
Ronaldo
SVK
MG2186
Olyman
Whitespider
GrizzlyAdams86
Carl & Blondie
Check on Jim
TALLGUY
Hunter72
heimannm
tree monkey
Modified Mark
CBFarmall
I heard @Whitespider hasn't been heard from in a while. Not sure he's coming?
Ronaldo
SVK
MG2186
Olyman
Whitespider
GrizzlyAdams86
Carl & Blondie
Check on Jim
TALLGUY
Hunter72
heimannm
tree monkey
Modified Mark
CBFarmall
I heard @Whitespider hasn't been heard from in a while. Not sure he's coming?
Hoskvarna
Ronaldo
SVK
MG2186
Olyman
Whitespider
GrizzlyAdams86
Carl & Blondie
Mo. Jim is aiming at it.
TALL-GUY
Hunter72
heimannm
tree monkey
Modified Mark
CBFarmall
I heard @Whitespider hasn't been heard from in a while. Not sure he's coming?
I thought @CoreyB and @MillerModSaws are coming too?
Ronaldo
SVK
MG2186
Olyman
Whitespider
GrizzlyAdams86
Carl & Blondie
Mo. Jim is aiming at it.
TALL-GUY
Hunter72
heimannm
tree monkey
Modified Mark
CBFarmall
I heard @Whitespider hasn't been heard from in a while. Not sure he's coming?
I thought @CoreyB and @MillerModSaws are coming too?
cus_deluxe
Commie Satan turd
Looks like it should be a good group, several other names are on the list on the other site as well. Getting ready to pack the car up today, gonna leave early tomorrow morning, hopefully there by 3 or 4 pm.
Anyone interested in a Mall 12A powerhead? Let me know I can bring it along.
You know how this goes often; if ya bring it no interest. Leave it at the garage & 2 folks may want to look at it. No suggestion just what has been seen (-;
Philbert spoke up for the Husky 61, and heimannm is interested in the 3400. Did get the 3400 to start but now it needs a new starter rope too. Still have the 019t.
I was just trying to help make room in your truck for the trip, 'cause that's the kind of guy I am . . . .
Philbert
I have bottled water and a good selection of soft drinks in the truck.
No saws yet...
Mark
No saws yet...
Mark
cus_deluxe
Commie Satan turd
gettin the wagon ready
What do you do about the gasoline smell?
I've been trash bagging each saw in our van. Kind if a bother but can't stand the oder.
Similar threads
- Sticky
