IQRaceworks
ArboristSite Lurker
What about a bar? The Oregon 32" bars are crazy expensive.......is there some china brand 32" bar I can get for a good price that will match the China 660 Huztl saw kit? I didn't see any on the Huztl site that big.
Since last post I found a Stens 36" for <$60 @ Maverick mower. An excellent price
Bummer. Was it a FarmerTec seal you replaced it with? Did you put dirko or something similar on the rim of the seal? What's you gut feeling on the cause? Did you have another failure recently that messes with the crank? PTO side is the tricky one, can't recall? The one with the lip that can cause issues with the spring?Well I lost crankcase pressure and vacuum. I had an extra crank seals. Replcaed the one on the PTO side and it still leaks.
Brian
Remember your decomp will cause a fail on the pressure test. On the cylinder I was just showing you one offs that can effect us. An upgrade cylinder wreaking havoc... unexpected. Definitely do a testBy the way it has a 56mm kit on it. I would not suspect anything there checked mounting screws and they are all tight. But you never know. I guess I am just going to have to pressure test it and see where the leak is. I checked the intake and the pulse hose and they both seam to be fine. I think I will start it and spray carb cleaner around everything and see if I can find the leak this way.
Brian
Where was your leak?I plan to. I have a bolt to put in place of the DSP valve so there is no leakage. I just got to find my stopper and exhaust blockoff plate. Don't remember where I put them.
Where is the piston rubbing? Is that red RTV?You did all the right things, surely it's a one off. I had to pull my cross jug off I was so proud of it. Piston rubbing. The farmertec top I used does no have that issue. The recoil broke twice trying to start it. Mostly oem parts, shredded them parts. Another bummer. Got it broke down. And ready in about 5-6 hours
Stop dude. Make us a list. I will post it on my website. You can post it here. I kick myself Everytime for not making it the first time. I did make one for the 250. Better late than never. LolHey Bedford. Wanted to say Hi, and I enjoy your videos. I'm building a HMS660 and wondering is there a parts list for the kit somewhere? I asked Hutzl and they told me "no, watch videos"... Haha. I'm completely familiar with the build, but I think there should be a parts list for "newbys" to double check the kit when they get it. This kit that I just received didn't have any of the parts bags labeled like I've seen in some of the newer build videos. I can pull the OEM parts schematics and measure out bolts for any saw, but maybe some people can't. Had to grab a kit with both jugs at the Black Friday deal, but I see that they pulled a small "lets get rid of some of our older crap cause it's a deal" trick.... No labels, asymetric ports on the jugs, no pin in brake band, ****** brake tension spring with the hook on the side, brass inserts not in the top cover etc.... I'll update after I put it together later today.. I'm tossing on the 56 and hoping there isn't a freeport issue... Kinda sucks, but you reap what you sow I guess...
Enter your email address to join: