• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Buy WTB Stihl 015 choke lever

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cranium

New Member
Joined
Jun 7, 2018
Messages
1
Reaction score
0
Location
Battle Ground, WA
I'm in need of a choke lever for Stihl 015 chainsaw

I think the original part number is 1116 182 0800

Good used or new

Thanks,

Cranium
 
I have found these hard to find. I have started making some. I made them out of a 5/16 wood dowel and drill a 3/16 hole in it and used a wire brad to make the hold point on the choke shaft and used a piece of 1/4 material to form the top lever. I did have an original to work from and get my measurements. I use the made ones when using the saws so it doesn't matter if I break it or loose it. If you can't find one PM me and I will see what I can do.
 
I know this post is a little old but was wondering if any of you all still have a choke lever?
 

Latest posts

Back
Top