FarmerTec Huztl MS660 Updated Build Kit - Build Thread

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ok, it's mostly the same parts as William Prophet already posted.
b7ad9383cfa7fc4c4b3dc7ee24289e92.jpg


Sent from my Moto G (4) using Tapatalk
On that little o-ring, the only one that I see on the parts breakdown around that size is on the carb adjustment screws... Anyway, all those parts should be extras.
 
As a fella kit builders you may recall the cautions with a stock kit saw, like the fuel line propensity to pull the pickup out and cause you to go lean about half a tank when you lay it on it's side. A oem hose is softer and will keep it submerged better. I hear guys run it dry and soon they have tears. Mine did good on a mill 070 is better

chainsaw kits and packing lists
http://thechainsawkitguy.com
http://YouTube.com/c/the1chainsawguy
 
Just my phone...
Did you download the tap a talk app or just a browser like chrome?

Just a browser click the upload a file tab that's right next to the post reply tab you use to post. After you touch the upload file button your phone will pop up and ask where the file needs to come from. Select photo gallery. Then it will open the gallery of pics find the one you want to show. Click it. You will then click ok. You will then see the upload percentage bar. When it finishes the upload there is a tab that says display as thumbnail or full size. Full size is what I do. Touch that. This is what embeds the pic into the post. After that click post reply just like normal.
 
Did you download the tap a talk app or just a browser like chrome?

Just a browser click the upload a file tab that's right next to the post reply tab you use to post. After you touch the upload file button your phone will pop up and ask where the file needs to come from. Select photo gallery. Then it will open the gallery of pics find the one you want to show. Click it. You will then click ok. You will then see the upload percentage bar. When it finishes the upload there is a tab that says display as thumbnail or full size. Full size is what I do. Touch that. This is what embeds the pic into the post. After that click post reply just like normal.
Cool!
20180620_122631.jpg
 
Having an issue with the choke sticking on ms660 build. Looks like I need to clean up the opening a bit. Just wondering should the choke ever fully close (like the throttle) or is it meant to be on an a slight angle. Cheers
 
Having an issue with the choke sticking on ms660 build. Looks like I need to clean up the opening a bit. Just wondering should the choke ever fully close (like the throttle) or is it meant to be on an a slight angle. Cheers
You may want to take the carb off and see if the butterfly is centered if it is not centered it will stick I've ran into that with a couple of carbs.
 

Latest posts

Back
Top