Stihl 064AV fuel elbow connector

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Stihlskin

ArboristSite Operative
AS Supporting Member
Joined
Jul 18, 2016
Messages
113
Reaction score
15
Location
Australia
part 1122 353 2600 Stihl 064 fuel elbow

Gday All, The fuel elbow connector seems to have a thicker inlet on one side. Does the thicker side go into the fuel pickup hose, or does the thinner? thanks Stihlskin
 
Interesting that on the 066 and the 660 that I have, the part number is the same as what you posted and both sides of the fuel elbow are identical length and thickness. Not sure how that could be.

Non genuine ...FArma,,,, I had a closer look, might be an illusion but ill get the calipers out and take a check, if I can find them. Ill get a photo
 
Interesting that on the 066 and the 660 that I have, the part number is the same as what you posted and both sides of the fuel elbow are identical length and thickness. Not sure how that could be.

Not much in it but definately a fat side and thin side.
 

Attachments

  • IMG_0532 (Small).jpeg
    IMG_0532 (Small).jpeg
    27.4 KB · Views: 4
  • IMG_0533 (Small).jpeg
    IMG_0533 (Small).jpeg
    30.1 KB · Views: 2
  • IMG_0534 (Small).jpeg
    IMG_0534 (Small).jpeg
    31.2 KB · Views: 2
  • IMG_0535 (Small).jpeg
    IMG_0535 (Small).jpeg
    32.6 KB · Views: 2
Not much in it but definitely a fat side and thin side.
On my 066, mine measures .0168" on both sides, thicker on the ripples and nipples, and each arm has an identical length. The arms on mine are the same as on your first image, 0532, the arm shown that points to the left. If it were my choice, I would push the slightly fatter arm down for the tank line and use the other arm for the short, visible fuel line that connects to the carb. Hope this helps.
 
On my 066, mine measures .0168" on both sides, thicker on the ripples and nipples, and each arm has an identical length. The arms on mine are the same as on your first image, 0532, the arm that that points to the left. If it were my choice, I would push the slightly fatter arm down for the tank line and use the other arm for the short, visible fuel line that connects to the carb. Hope this helps.

Thanks Ill take your advice.
 

Latest posts

Back
Top