MS 462 and 572xp coming soon...excited?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I’m about to pull the trigger on a 372, but would be extremely disipointed if I drop that amount of coin and have a 572 / 462 released within a few months. So I’m considering holding off. But that’s not ideal as I have a lot of oak to cut.

If I were a dealer for either brand I would be pretty upset by both companies releasing these products earlier than available to me and potentially costing me sales on 372 / 462 / 441. I assume there are more people like me out there sitting on their cash until these saws are released.

It’s almost October. I wonder if these are going to be available yet?
 
461 is a fantastic saw if u need a saw that will work nearly 7 days a week year after year. If it was my responsibility to supply the saws at work I would get a few more 461's while their still available.
 
461 is a fantastic saw if u need a saw that will work nearly 7 days a week year after year. If it was my responsibility to supply the saws at work I would get a few more 461's while their still available.
I agree !71F14D1C-7E4E-4502-B038-54CD7B8E34BA.png
 
462 seems to have a low intake out of the box. Randy posted that he timed one at 82. From the little i thought i knew about timing more intake usually equals more fuel consumption...
 
A year ago it was third quarter of 2018.

It was the fourth quarter of 2018 for the 462 and 3rd quarter of 2019 for the 500i. Atleast that what I was told. Doesnt mean they wont get moved again. Ive learned to accept some old advice. Dont think about it and your head wont hurt lol
 
Came across this by accident on Instagram. So between October and December for the 462 with any luck it seems.
168418c713ccbf62a8a432286fe72df2.jpg


Sent from my SM-G950U using Tapatalk
I commented the same thing and they said first quarter of 2019
 
I hope they hold off on the 462 until later in the year.

I get my bonus in March and plan on grabbing a few 461s to stick on the shelf. And I don't want to hunt for them due to production stoppage...
 
I was at my *Dealer * This past Week he told me 462 is in his system. He is ordering a few . He has not heard anything till now.
 
Why limit yourself to just two? Echos 70+ cc is also on the cusp of coming out. Considering I just noodled a 32 inch bar in hardwood with their current 60cc saw, the new design big brother just might be a beast.
 

Attachments

  • PhotoEditor_20190104_133824956.jpg
    PhotoEditor_20190104_133824956.jpg
    107.5 KB · Views: 54
Back
Top