• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 350 price reduced

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cuinrearview

Red saw lover
Joined
Oct 24, 2014
Messages
10,212
Reaction score
19,613
Location
Hillsdale, MI
Rebuilt from the "case" up with Nachi bearings, Cross Performance seals, kitted HDA-159, new fuel line. Steel intake clamp. At some point in it's previous life the muffler came loose and melted the oil tank a little. It doesn't leak. I've added a 351 style muffler bracket. Timing advanced, muffler opened up under the deflector. The bearing cup divider has been removed and the square edges in the lower transfers and the cup have been smoothed. It has a Hyway 45mm popup piston. The base gasket has been deleted and the top of the bearing cup had .010 taken off. Squish is .021. Compression is just north of 180psi after 4 tanks. This is an easy starting, good running saw. The throttle response is very quick. I've had my fun with it and have everything to do another. I'd like $225 for the powerhead wearing your rim sprocket of choice. As usual, questions and pic requests are welcome.
20181121_142806.jpg 20181121_142753.jpg 20181121_142832.jpg 20181121_142821.jpg 20181121_140956.jpg 20181020_064313.jpg
 
Rebuilt from the "case" up with Nachi bearings, Cross Performance seals, kitted HDA-159, new fuel line. Steel intake clamp. At some point the muffler came loose and melted the oil tank a little. It doesn't leak. I've added a 351 style muffler bracket. Timing advanced, muffler opened up under the deflector. The bearing cup divider has been removed and the square edges in the lower transfers and the cups have been smoothed. It has a Hyway 45mm popup piston. The base gasket has been deleted and the top of the bearing cup had .010 taken off. Squish is .021. Compression is just north of 180psi after 4 tanks. This is an easy starting, good running saw. The throttle response is very quick. I've had my fun with it and have everything to do another. I'd like $240 for the powerhead wearing your rim sprocket of choice. As usual, questions and pic requests are welcome.
View attachment 712668 View attachment 712669 View attachment 712670 View attachment 712671 View attachment 712672 View attachment 712673

Good looking saw.
 
I have 350 i just rebuilt with flat 353 piston i can wait see how it runs and brett i have fueled the new 450
 
What do you guys do about the cat mufflers , i feel like i dont need them in my life
 
Never encountered one on a 350. When I get to unboxing and running my Dolkita I will put a 5100s muffler on it. There's always the screwdriver and a hammer trick, or the chicom Jungle muffler trick...
 
Never encountered one on a 350. When I get to unboxing and running my Dolkita I will put a 5100s muffler on it. There's always the screwdriver and a hammer trick, or the chicom Jungle muffler trick...
I think both 359 have it ,
 
Back
Top