• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Husqvarna 350 price reduced

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That's a fine looking saw. I wouldn't let it go under 300 personally. That's a lotta work. Very nice.

After a few heat cycles check the head bolts. I've had more than a few come loose.
Thanks Matt. I had the tank off last week and hit the bearing cup bolts. I will check the cylinder bolts before I run it again or send it out. I expect a decent jump in compression over the next few tanks. Would a 200 psi 350 be crazy?
 
Bump.

Same cylinder and piston as a 353, with a little lighter plastic case. If a buyer wants a few more ounces shaved off I can add a plastic 345 wrap.
 
Thank you. Can't wait to get the next one together. The cylinder is a few oz lighter than this one:innocent:
I love the 350 series, after a little practice, they’re my favorite to work on. I’ve lost count of how many I’ve put together or modified over the last 3 or 4 yrs. My sons a professional arborist and he had a beat, worn out 350 carcass he wanted fixed for his ground man saw, I took the challenge and put the 346 OEM topend on it and gave it back to him for a Christmas present. It’s been n service now for 2 yrs without a problem and his groundman grabs it before all the other more modern saws he has at his disposal! I’ve done 2 of them and both came out well, the price on the OEM 346 piston-cylinder kit is hard to beat!
 
I love the 350 series, after a little practice, they’re my favorite to work on. I’ve lost count of how many I’ve put together or modified over the last 3 or 4 yrs. My sons a professional arborist and he had a beat, worn out 350 carcass he wanted fixed for his ground man saw, I took the challenge and put the 346 OEM topend on it and gave it back to him for a Christmas present. It’s been n service now for 2 yrs without a problem and his groundman grabs it before all the other more modern saws he has at his disposal! I’ve done 2 of them and both came out well, the price on the OEM 346 piston-cylinder kit is hard to beat!
I've got a couple NE jugs around and an OE on the way, with lots of places to put them all. I'm kinda enjoying seeing what I can get from the 350/353 setup right now.
 

Latest posts

Back
Top