Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
F82418B6-E7B3-48B7-A250-ACA8435E9BE3.png 3A452314-8E05-4354-8D5E-C6E21FF13DFC.png 435496C0-7202-41BB-A6E7-C14D83A80E55.png
I’ve never seen the email you supposedly sent to Jack and his response to you as you stated in a previous post ... we have no problem with you posting it here or if you prefer pm me with it ... I’m not taking on any more work as my plate is full at the present time ... IF you wish to have Hotsaws101 perform the work then contact him at [email protected] .... Good luck in your future endeavors!
 
The barber chair video really gave it a wack....

I mean, how in the hell does one barber chair a tree that ain't even a leaner?

Wow.....that was "special".
Yah , the tree was actually leaning with a heavy crown in the direction of fall ... might not be able to see that from the video ... actually Ash is VERY prone to barber-chair Randy especially when EAB infested ! Most fart smellers , oops I mean smart fellers are aware of this fact ... I’ll be sure to consult you for your assessment before dropping anymore ... Heavens knows I only have about 40 more to do ! Lol -Perhaps you could also give some porting tips while you are at it ! Here’s one that went down right on target and the Hotsaws101 461R bucking the aftermath right quick ! ... that’s how we do it up north Randy O !
 
I’ve never seen the email you supposedly sent to Jack and his response to you as you stated in a previous post ... we have no problem with you posting it here or if you prefer pm me with it ... I’m not taking on any more work as my plate is full at the present time ... IF you wish to have Hotsaws101 perform the work then contact him at [email protected] .... Good luck in your future endeavors!
How come he isnt responding after the batphone hot line call?
 
Yah , the tree was actually leaning with a heavy crown in the direction of fall ... might not be able to see that from the video ... actually Ash is VERY prone to barber-chair Randy especially when EAB infested ! Most fart smellers , oops I mean smart fellers are aware of this fact ... I’ll be sure to consult you for your assessment before dropping anymore ... Heavens knows I only have about 40 more to do ! Lol -Perhaps you could also give some porting tips while you are at it ! Here’s one that went down right on target and the Hotsaws101 461R bucking the aftermath right quick ! ... that’s how we do it up north Randy O !

Nice close up of the boots in that first vid
 
Hell it wasn't more than 12" in diameter. Heavy crown?

You probably should stop while you're still alive.
Actually it was over 18” at the stump ... 20” bar on that Hotsaws101 461R ripper .... here’s a smaller one about 16” at the stump for your enjoyment! as you can see Randy these trees grow straight up like a popsicle! When dead/dying from EAB a leaning crown makes them prone to chair ... We have since been using a rope in the canopy to assist the fall and it’s working well ! Here’s a throwbag launcher I made to get a line into the tree ... Works great , compressed air powered ! Use bike pump to pressurize cylinder ... get over 100ft with 80psi
 
Doesn’t appear to b enough now does it, he is learning though. If you look at his qoutes he has a “knowledgeable individual” helping him. Which is code for hotsaws101 vids on youtube

Notice his boots? ROFLMAO. B funny if you saw him trip on his laces running from the chair
Yah
 
Yah , I can’t speak for another ; again good luck on your future endeavors!
Why not? You said he was waiting for my email after you contacted him on the batphone hotline, can’t you put out another batphone hotline contact call and see what’s going on? Thankyou
 
Why not? You said he was waiting for my email after you contacted him on the batphone hotline, can’t you put out another batphone hotline contact call and see what’s going on? Thankyou
If you wish to contact Jack about him zipping a 362c for you then contact him at the email I provided ... That’s between YOU and Jack ... I’m unable to assist you at the present time , thank you for your consideration and have a blessed day ! Out
 
If you wish to contact Jack about him zipping a 362c for you then contact him at the email I provided ... That’s between YOU and Jack ... I’m unable to assist you at the present time , thank you for your consideration and have a blessed day ! Out
But I did contact him at both emails you provided for me. I just posted them above. Can you please resend the bat signal for me? Thankyou
 
If you wish to contact Jack about him zipping a 362c for you then contact him at the email I provided ... That’s between YOU and Jack ... I’m unable to assist you at the present time , thank you for your consideration and have a blessed day ! Out
Do you have the contact info for the hotsaws101 southern franchise you can give me? Thankyou
 
Yah...That would be me, you wish me to port yer saw?
Pm sent. To be honest, I’m not good enough to tell the difference between my stock 362 and one modified by hotsaws101 east coast franchise/ psycho ss/ BCP. @Frank Rizzo since your so busy and I won’t be able to tell the difference between my stock saw and your zipped saw, would you be willing to just send me the sticker? I will pay full price as if you actually modified the saw. Thankyou
 
Pm sent. To be honest, I’m not good enough to tell the difference between my stock 362 and one modified by hotsaws101 east coast franchise/ psycho ss/ BCP. @Frank Rizzo since your so busy and I won’t be able to tell the difference between my stock saw and your zipped saw, would you be willing to just send me the sticker? I will pay full price as if you actually modified the saw. Thankyou
LOL
 
Status
Not open for further replies.
Back
Top